ANYCUBIC ABS-Like Resin 2.0 Grey 2kg Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC's ABS-Like Resin 2.0 is sold as its second-generation tough resin, and this listing is a 2kg grey bundle. It is one of the better-documented budget resins: ANYCUBIC states a hardness of 83-85HD and an 1800 MPa bend modulus, and says prints can be drilled, tapped and machined. Low viscosity and quick bubble release aim at smooth surfaces and fewer failures, odor is described as minimal, and ANYCUBIC's Photon Workshop slicer ships with preset settings for it. The listing does not say how the 2kg is split (one bottle or two), lists no wavelength in its bullets beyond 'all LCD resin 3D printers', and gives no elongation figure, so it is hard to compare with ABS-Like 3.0. We have not printed with it; everything here comes from ANYCUBIC's page.
What stands out
- 83-85HD hardness and 1800 MPa bend modulus stated
- Drill, tap and machine after curing
- Preset Photon Workshop profiles
Who it fits
Good fit for
ANYCUBIC printer owners who slice in Photon Workshop and want a tough grey resin for miniatures, terrain and functional parts at a low price per kilo.
Who should skip it
Buyers who need flexibility numbers (no elongation is listed) or who want to know the bottle split before buying. If you already use ABS-Like 3.0, which lists 30% elongation, there is little reason to step back to 2.0.
Verdict: A cheap, well-specified tough resin for ANYCUBIC users; the newer 3.0 is the better-documented upgrade.
What the listing states
83-85HD hardness
A hard surface that resists wear and scratches.
1800 MPa bend modulus
Stiff enough to resist brittle snapping under bending loads.
Low viscosity, quick bubble release
Faster recoat and smoother surfaces with fewer pinholes.
2kg grey bundle
Bulk quantity; the split between bottles is not stated.
Formula
ANYCUBIC says the second-generation formula raises overall strength and toughness against minor impacts and cracks, improves adhesion to cut failures and keeps odor low. The package is 8.26 x 4.33 x 11 inches and 4.41 lb, which fits 2kg of resin.
Printing
Load the preset profile in Photon Workshop for your ANYCUBIC printer and print; on other brands' LCD printers, run an exposure test first. Wash in IPA, cure, and only then drill or tap holes.
Before buying
Checks.
Check before you buy
- You print on an LCD resin printer
- You have IPA and a curing light
- You do not need an elongation figure
- You can store 2kg away from light
The product at a glance
ANYCUBIC ABS-Like Resin 2.0 Grey 2kg
Best for: Bulk tough resin
- Resin Type
- ABS-Like
- Compatible Technology
- LCD
- Net Weight
- 2kg
- Shore Hardness
- 83–85HD
- Printing Technology
- Resin
- Color
- Grey
View on Amazon: ANYCUBIC ABS-Like Resin 2.0 Grey 2kg Affiliate link
ANYCUBIC ABS-Like Resin 2.0, grey, 2kg bundle: 83-85HD hardness, 1800 MPa bend modulus, drillable and tappable, low viscosity, minimal odor, preset Photon Workshop profiles.
Pros
- Real hardness and modulus figures
- Low price for 2kg
- Easy setup on ANYCUBIC printers
Cons
- No elongation figure
- Bottle split not stated
- Older than ABS-Like 3.0
Good fit if
- You own an ANYCUBIC printer
- You print tough grey parts in bulk
Skip if
- You want the newest ANYCUBIC formula
Verdict: Good value tough resin for ANYCUBIC users.
Specifications side by side
| Spec | ANYCUBIC ABS-Like Resin 2.0 Grey 2kg |
|---|---|
| Resin Type | ABS-Like |
| Compatible Technology | LCD |
| Net Weight | 2kg |
| Shore Hardness | 83–85HD |
| Printing Technology | Resin |
| Compatible Material | ABS |
| Color | Grey |
| Size | 2KG |
| Dimensions | 11 × 8.26 × 4.33 inches |
| Weight | 4.41 pounds |
If you are also organizing a print room and need storage for resin bottles and tools, our besiost 63 2 grey corner closet review covers that unit's specs.
Frequently asked questions
How hard is ANYCUBIC ABS-Like Resin 2.0?
ANYCUBIC lists 83-85HD hardness and an 1800 MPa bend modulus.
Can ANYCUBIC ABS-Like Resin 2.0 grey be tapped for screws?
ANYCUBIC says cured prints can be drilled, tapped and machined.
Does Photon Workshop have settings for ANYCUBIC ABS-Like Resin 2.0?
Yes. The listing says ANYCUBIC's slicer ships with pre-configured settings for every ANYCUBIC resin.
Is the ANYCUBIC ABS-Like 2.0 bundle one 2kg bottle?
The listing calls it a 2kg bundle but does not say how many bottles it contains.
