As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HeyGears PAC10 Wax Casting Resin Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

PAC10 is HeyGears' jewelry casting resin, and its numbers are aimed squarely at burnout: 70-80% wax content, 0.02% ash, ±0.03mm tolerance and walls as thin as 0.12mm. That wax load is far higher than most castable resins (Siraya Tech and Antinsky list up to 40% or just 'some wax'), which should mean cleaner burnout and fewer casting defects in gold and silver. The catches are compatibility and cost. It works only on the Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, and only with the UltraCraft Reflex Pulsing Release Module Kit installed, and a 1kg bottle costs far more than a typical castable resin. This review draws on HeyGears' listing only.

What stands out

  • 70-80% wax with 0.02% ash
  • ±0.03mm tolerance
  • 0.12mm minimum wall

Who it fits

Good fit for

Jewelers and small casting studios already running a HeyGears Reflex with the pulsing release kit, who cast fine rings, pendants and settings in precious metal and want the cleanest possible burnout.

Who should skip it

Anyone without a Reflex printer and the UltraCraft kit, hobbyists casting occasionally, and anyone who would rather print a cheaper castable on an open printer. The listing gives no burnout schedule or wavelength.

Verdict: Top-spec casting numbers for a closed system; worth it only if you are already invested in Reflex.

What the listing states

70-80% wax, 0.02% ash

Burns out almost completely, reducing residue in the mold.

±0.03mm tolerance

Castings fit as designed, which matters for stone settings.

0.12mm minimum wall

Thin filigree and prongs can be printed and cast.

Reflex/Turbo/2/2 Pro + pulsing kit

Will not run without the UltraCraft Reflex Pulsing Release Module Kit.

Formula

The violet resin is designed for smooth, detailed surfaces that need little finishing before investing. HeyGears gives no spec block (no size field, weight or model), though the title states 1KG.

Casting workflow

Print on a Reflex fitted with the pulsing release module, clean and cure the patterns, sprue them and invest as usual. HeyGears does not publish a burnout cycle on the page, so ask for its recommended schedule before your first flask.

Before buying

Checks.

Check before you buy

  • You own a Reflex, Reflex Turbo, Reflex 2 or 2 Pro
  • The UltraCraft pulsing release kit is installed
  • You cast precious metal regularly
  • You have HeyGears' burnout schedule

The product at a glance

HeyGears PAC10 Wax Casting Resin 1KG

Best for: Reflex jewelers

Resin Type
Wax Casting
Net Weight
1KG
Application
Jewelry and precious metal casting
Printing Technology
Resin

View on Amazon: HeyGears PAC10 Wax Casting Resin 1KG Affiliate link

HeyGears PAC10 wax casting resin, violet, 1kg: 70-80% wax, 0.02% ash, ±0.03mm tolerance, 0.12mm walls; Reflex, Turbo, Reflex 2 and 2 Pro with the UltraCraft pulsing release kit only.

Pros

  • Very high wax content
  • Tight tolerance
  • Fine 0.12mm walls

Cons

  • Needs a specific printer and kit
  • Very expensive per kilo
  • No burnout schedule listed

Good fit if

  • Your studio casts gold rings on a Reflex 2
  • You own the pulsing release kit

Skip if

  • You use any other printer

Verdict: Excellent casting specs for a closed ecosystem.

Specifications side by side

Spec HeyGears PAC10 Wax Casting Resin 1KG
Resin Type Wax Casting
Net Weight 1KG
Application Jewelry and precious metal casting
Printing Technology Resin

Frequently asked questions

How much wax is in HeyGears PAC10?

70-80%, with an ash value of 0.02%, according to HeyGears.

Does HeyGears PAC10 need extra hardware?

Yes. It requires the UltraCraft Reflex Pulsing Release Module Kit on a compatible Reflex printer.

Which Reflex printers can print HeyGears PAC10 violet?

Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro.

How thin can HeyGears PAC10 walls be?

0.12mm minimum wall thickness, with ±0.03mm tolerance.

See also