ZIRO Metal Copper PLA Filament Review: 1.75mm 1kg Metal Series
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is ZIRO's Metal Series PLA in copper, a 1kg reel meant to give statues, cosplay pieces and decor a coppery sheen straight off the bed. ZIRO describes it as metal-infilled for a metal appearance, but it never says how much metal is in the blend or whether it is powder or pigment, so treat it as a decorative finish rather than a heavy, cold-to-the-touch metal fill. The print window is plain PLA territory: 190-220°C at the nozzle, 50-60°C on the bed and 30-90mm/s. Tolerance is ±0.03mm, and the reel comes vacuum sealed with desiccant plus a reseal bag. Stock was low at the time of writing. Our notes are drawn from ZIRO's page; we did not print with it.
What stands out
- Copper metallic finish
- Standard PLA temperatures
- Vacuum pack with desiccant
- Reseal bag included
Who it fits
Good fit for
Makers who want copper-colored busts, trophies, steampunk parts or game pieces without painting, on any common FDM printer.
Who should skip it
Not the pick if you need real metal weight or a polishable patina, since the metal content is never stated. Owners of high-speed printers will find 90mm/s slow.
Verdict: An easy copper-look PLA; the listing is vague on what the metal actually is.
ZIRO Metal copper at a glance
Metal-infilled PLA, copper
A metallic look; no metal percentage is given.
190-220°C nozzle, 50-60°C bed
Prints like regular PLA on most machines.
30-90mm/s
Moderate speed range.
±0.03mm, 1kg
Common tolerance and a full-size reel.
Missing details
ZIRO does not say whether the copper fill is abrasive. Many true metal-filled filaments wear brass nozzles, so if you print a lot of it, a hardened nozzle is the cautious choice. The listing also gives no density or weight-feel figures and no advice on sanding or polishing.
Printing copper PLA
Slower outer walls and a slightly lower layer height show the sheen more evenly. Brush or sand lightly if you want a satin look, and store the open reel in the reseal bag between jobs.
Copper PLA questions
Worth a look first.
Check before you buy
- A decorative copper look is enough for you
- You are fine with an unstated metal content
- You may want a hardened nozzle for long runs
- 90mm/s suits your printer
The product at a glance
ZIRO Metal PLA 1.75mm Copper
Best for: Copper-look decorative prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 90mm/s
- Dimensional Accuracy
- +/-0.03mm
- Printing Technology
- FDM
View on Amazon: ZIRO Metal PLA 1.75mm Copper Affiliate link
ZIRO Metal Series copper PLA: a 1kg, 1.75mm metal-look PLA with standard PLA settings and vacuum packing; the listing does not give the metal content.
Pros
- Coppery finish without paint
- Easy PLA temperatures
- Desiccant and reseal bag
Cons
- Metal content not stated
- Abrasiveness unknown
- Low stock
Good fit if
- You print copper-tone decor
- You want a metallic look on a stock printer
Skip if
- You need true metal weight
- You want to polish a real patina
Verdict: A simple copper-look PLA for display pieces.
Specifications side by side
| Spec | ZIRO Metal PLA 1.75mm Copper |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 90mm/s |
| Dimensional Accuracy | +/-0.03mm |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Dimensions | 8.2 × 8.2 × 3.2 inches |
| Weight | 2.2 pounds |
| Color | Metal-copper |
| Model | 1.75mm |
Frequently asked questions
Is ZIRO Metal copper PLA real copper filled?
ZIRO calls it metal-infilled but gives no metal type or percentage.
What temperatures does ZIRO list for Metal copper PLA?
190-220°C at the nozzle and 50-60°C on the bed.
Does ZIRO Metal copper PLA need a hardened nozzle?
The listing does not say; a hardened nozzle is a safe precaution for heavy use.
How is ZIRO's copper reel packed?
Vacuum sealed with desiccant, plus a reseal bag and a notecard.
