As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ZIRO Fluorescent PLA Filament Review: Fluo Yellow 1.75mm 1kg

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

ZIRO sells this Fluo Yellow PLA for prints that pop under a UV lamp, and its title says up front that it does NOT glow in the dark. Fluorescent pigment reflects ultraviolet as visible light while the lamp is on; it stores nothing, so the print goes dull once the room is dark and the light is off. That makes it a good choice for blacklight party props, safety markers and display pieces, and the wrong one for night-light toys. ZIRO lists a 190-220°C nozzle, a 50-60°C bed and 30-90mm/s, with a ±0.03mm diameter tolerance on a 1kg reel. A 5m cleaning strand and a 5m random sample ride along in the box. Stock was low when this page was written, and everything here is taken from the product page rather than our own prints.

What stands out

  • Reacts strongly to blacklight
  • Full print settings on the page
  • Cleaning strand plus sample in the box
  • Low-odor PLA base

Who it fits

Good fit for

Anyone printing props, signs or decorations for UV-lit rooms, escape rooms, stage sets or Halloween displays, and people who just want a loud neon yellow in daylight.

Who should skip it

If you want parts that keep shining after lights-out, pick a phosphorescent filament instead. Fast printers pushing past 90mm/s are outside ZIRO's stated range.

Verdict: A vivid neon yellow PLA that does its blacklight trick, as long as you do not expect afterglow.

What ZIRO lists for Fluo Yellow

Fluorescent, not phosphorescent

Brightens under UV light only; no light is stored for later.

Nozzle 190-220°C, bed 50-60°C

Ordinary PLA settings that most printers handle out of the box.

30-90mm/s

A moderate speed window; not tuned for high-speed machines.

±0.03mm tolerance, 1kg

Typical diameter control for a budget-to-mid PLA.

Spool and packaging

The plastic reel is listed at 7.99in across and 2.48in wide with a 2.36in hub hole, so check that your holder or dryer takes a reel that size. ZIRO says the filament is dried for a day and vacuum packed, and a reseal bag is included for storage after opening. The listing makes no claim about food contact or outdoor UV fading.

Getting the neon effect

Thicker walls and solid infill give the fluorescent color more depth under a lamp. A 365-395nm UV flashlight or blacklight tube is what triggers the effect. Start near the middle of the 190-220°C range and adjust for gloss and stringing.

Fluo Yellow checklist

Worth confirming first.

Check before you buy

  • You have, or will buy, a UV lamp for the display
  • Afterglow in the dark is not what you need
  • Your spool holder takes a 7.99in reel
  • Print speeds stay at 90mm/s or below

The product at a glance

ZIRO Fluorescence PLA Filament 1.75mm

Best for: Blacklight props and displays

Material Type
PLA
Filament Diameter
1.75mm
Net Weight
1kg
Max Print Speed
90 mm/s
Dimensional Accuracy
+/- 0.03mm
Surface Finish
Fluorescent

View on Amazon: ZIRO Fluorescence PLA Filament 1.75mm Affiliate link

ZIRO Fluo Yellow is a 1kg, 1.75mm fluorescent PLA that glows bright under blacklight but has no afterglow, sold with full print settings, a reseal bag and a cleaning strand.

Pros

  • Strong blacklight response
  • Clear temperature and speed range
  • Extras in the box

Cons

  • No glow in the dark
  • 90mm/s top speed
  • Stock running low

Good fit if

  • You build UV-lit props or signs
  • You want neon yellow in daylight too

Skip if

  • You need prints to shine after lights-out
  • Your printer runs well above 90mm/s

Verdict: A dependable neon PLA for blacklight displays.

Specifications side by side

Spec ZIRO Fluorescence PLA Filament 1.75mm
Material Type PLA
Filament Diameter 1.75mm
Net Weight 1kg
Max Print Speed 90 mm/s
Dimensional Accuracy +/- 0.03mm
Surface Finish Fluorescent
Printing Technology FDM
Compatible Material PLA
Features Glow in the Dark
Dimensions 8.2 × 8.2 × 3.2 inches
Weight 2.2 pounds
Color Fluo-yellow
Model 1.75mm

Frequently asked questions

Does ZIRO Fluo Yellow PLA glow after the lights go off?

No. It only brightens while UV light hits it.

What settings does ZIRO give for its fluorescent PLA?

Nozzle 190-220°C, bed 50-60°C, speed 30-90mm/s.

What extras come with the ZIRO fluorescent spool?

A reseal bag, about 5m of cleaning filament and a 5m sample of a random color.

Will ZIRO's fluorescent yellow fit a standard spool holder?

The reel is 7.99in wide with a 2.36in hub, which suits most holders made for 1kg spools.

See also