YXPOLYER PA6-CF Carbon Fiber Nylon Filament 500g Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
YXPOLYER PA6-CF is a carbon fiber reinforced nylon sold on a 500g spool that the title calls AMS compatible. YXPOLYER puts the short carbon fiber content at 15% and pitches the material for stiff, light parts that hold their shape under load and heat: fixtures, brackets, electronics mounts and automotive or drone parts. It also claims resistance to acids, alkalis, oils and solvents. What the listing does not give is just as important for an engineering filament: no nozzle, bed or chamber temperatures, no drying settings, no tensile, modulus or heat deflection numbers, and no tolerance. Nylon takes on moisture quickly and carbon fiber wears brass nozzles, so a dryer and a hardened nozzle are part of the cost of using it. The 500g size makes it a sensible way to try PA6-CF before buying a full kilo. This review is based on YXPOLYER's listing and published specs only.
What stands out
- PA6 nylon with 15% short carbon fiber
- 500g spool, AMS-compatible per title
- Stiff, light parts with heat resistance (claim)
- Chemical resistance claimed
- No temperatures, drying or strength data
Who it fits
Good fit for
Printers with a hardened nozzle, a filament dryer and an all-metal hotend who want to try carbon fiber nylon on a small spool.
Who should skip it
Anyone with a stock brass nozzle or PTFE-lined hotend, or who needs published strength data for an engineering part.
Verdict: A low-cost way to try PA6-CF, held back by an empty settings and data sheet.
PA6-CF 500g in plain terms
PA6-CF, 15% fiber
Stiffer and more stable than plain nylon.
500g spool
Trial size; less waste if the material does not suit you.
AMS-compatible spool
Title claim; abrasive filament still wears AMS feed paths over time.
Chemical resistance
Claimed against oils, solvents, acids and alkalis.
No settings or data
You will need to tune temperatures and drying yourself.
What 15% carbon fiber does in PA6
Short carbon fibers make nylon stiffer and reduce warping and shrinkage, which is why PA6-CF suits jigs, mounts and brackets that must stay flat. YXPOLYER also stresses low weight and stability under prolonged heat, but gives no heat deflection temperature, so check margins before using it near motors or engines.
Printing YXPOLYER PA6-CF
Fit a hardened steel or ruby nozzle of 0.4mm or larger, since fibers can clog small openings and grind brass. Dry the spool before every session and feed it from a dry box, as nylon absorbs moisture within hours. Use a PA-CF profile from your slicer as a starting point and a glue-coated plate; an enclosure helps larger parts.
Before buying YXPOLYER PA6-CF 500g
Checks.
Check before you buy
- Your printer has a hardened nozzle for YXPOLYER PA6-CF
- You own a dryer for the PA6-CF spool
- Your part does not need certified YXPOLYER strength data
The product at a glance
Yxpolyer PA6-CF Nylon Filament
Best for: Trying carbon fiber nylon
- Material Type
- PA6-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 500g
- Compatible Material
- Nylon
- Features
- Carbon Fiber
- Weight
- 1.1 pounds
View on Amazon: Yxpolyer PA6-CF Nylon Filament Affiliate link
YXPOLYER PA6-CF 500g: 15% carbon fiber nylon on an AMS-ready spool for stiff, heat- and chemical-resistant parts; no settings or strength data.
Pros
- 15% carbon fiber PA6
- 500g trial spool
- AMS-compatible spool per title
Cons
- No temperatures or drying settings
- No strength or HDT figures
- Needs a hardened nozzle and a dryer
Good fit if
- You want to try PA6-CF on a small spool
Skip if
- Your printer only has a brass nozzle for PA6-CF
Verdict: A small, cheap entry to PA6-CF.
Specifications side by side
| Spec | Yxpolyer PA6-CF Nylon Filament |
|---|---|
| Material Type | PA6-CF |
| Filament Diameter | 1.75mm |
| Net Weight | 500g |
| Compatible Material | Nylon |
| Features | Carbon Fiber |
| Weight | 1.1 pounds |
| Size | PA6-CF |
| Color | Black - 500g |
| Model | PA6-CF 500g |
Frequently asked questions
How much carbon fiber is in YXPOLYER PA6-CF?
15% short carbon fiber, per the listing.
Does YXPOLYER PA6-CF fit an AMS?
The title says the spool is AMS compatible; abrasive fibers still wear feed parts.
What temperatures does YXPOLYER PA6-CF need?
The listing gives none; start from a PA6-CF profile.
Is YXPOLYER PA6-CF chemical resistant?
YXPOLYER claims resistance to acids, alkalis, oils and solvents.
See also
- tecsonar silk pla tricolor 10 roll bundle review
- frucindra silk pla plus tricolor 4 pack review
- ujoy3d hyper pla plus 8 color bundle review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best fiber laser 3d printers
- wonitago carbon fiber kayak review
