UJOY3D Hyper PLA+ 8-Color Filament Bundle (8 x 250g) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The UJOY3D Hyper PLA+ bundle is eight 250g spools, 2kg in total, in the colors most people actually reach for: black, jade white, grey, red, dark blue, green, yellow and orange. That makes it a starter set for a new printer or a multi-color unit, rather than a novelty pack. Unlike most small-spool bundles, the listing gives settings: 205-220°C nozzle (210°C for the first layer), 55-65°C bed and 200-400mm/s. Tolerance is ±0.03mm on 1.75mm. UJOY3D describes the formula as a modified PLA with better toughness than standard PLA, made from virgin material, with no figures behind the toughness claim. UJOY3D seals every small spool in its own vacuum bag with desiccant. The 250g spools are small; UJOY3D suggests printing a small-spool adapter if your holder needs one. This review comes from UJOY3D's listing and published specs, not from test prints.
What stands out
- 8 x 250g = 2kg
- Black, jade white, grey, red, dark blue, green, yellow, orange
- 205-220°C nozzle, 55-65°C bed
- 200-400mm/s speed range
- ±0.03mm, vacuum sealed per spool
Who it fits
Good fit for
New printer owners and multi-color users who want a basic palette with published settings in one box.
Who should skip it
Anyone who needs large single-color parts or full-size spools that drop straight into an AMS.
Verdict: A practical basic-color starter set with settings that most bundles leave out.
UJOY3D 8-color bundle specs
8 x 250g
2kg total; each color covers a few small to medium prints.
Nozzle 205-220°C
210°C suggested for the first layer.
Bed 55-65°C
Normal PLA bed range.
200-400mm/s
Made for fast printers; slower machines work too.
±0.03mm
Tolerance on 1.75mm.
Why the UJOY3D color mix works
Black, white and grey cover functional parts and housings; red, dark blue, green, yellow and orange give the primary and secondary colors needed for toys, labels and multi-color models. With four-slot units such as an AMS lite or CFS, two sets of four colors can be swapped in by project.
Printing UJOY3D Hyper PLA+
Start at 210°C on a 60°C bed and adjust within UJOY3D's range. At the top of the 200-400mm/s band, raise nozzle temperature toward 220°C to keep layers bonded. Small spools run out mid-print more often, so check remaining weight before long jobs, and print a spool adapter if your holder is sized for 1kg reels.
Before buying the UJOY3D 8-color bundle
Checks.
Check before you buy
- You want UJOY3D's eight basic colors
- Your holder or AMS takes UJOY3D 250g spools
- Your parts fit within one 250g UJOY3D spool
The product at a glance
UJOY3D Hyper PLA+ 8-Color Bundle
Best for: Basic color starter set
- Material Type
- Hyper PLA+
- Filament Diameter
- 1.75mm
- Net Weight
- 2kg
- Max Print Speed
- 400 mm/s
- Dimensional Accuracy
- ±0.03mm
- Surface Finish
- Glossy
View on Amazon: UJOY3D Hyper PLA+ 8-Color Bundle Affiliate link
UJOY3D Hyper PLA+ 8 x 250g: basic eight-color set, 205-220°C, 55-65°C bed, 200-400mm/s, ±0.03mm; toughness claim without data.
Pros
- Useful basic color palette
- Full print settings listed
- Each spool vacuum sealed
Cons
- 250g spools limit part size
- Toughness claim has no figures
- May need a spool adapter
Good fit if
- You want a basic palette for a new printer
Skip if
- You print big parts in one color
Verdict: A sensible eight-color PLA+ starter set.
Specifications side by side
| Spec | UJOY3D Hyper PLA+ 8-Color Bundle |
|---|---|
| Material Type | Hyper PLA+ |
| Filament Diameter | 1.75mm |
| Net Weight | 2kg |
| Max Print Speed | 400 mm/s |
| Dimensional Accuracy | ±0.03mm |
| Surface Finish | Glossy |
| Compatible Material | PLA |
| Size | 2KG |
| Weight | 4.41 pounds |
| Color | Hyper Pla+ Multicolor Pack-0.25kg*8 |
| Model | Hyper PLA+ Filament |
Frequently asked questions
What colors are in the UJOY3D Hyper PLA+ bundle?
Black, jade white, grey, red, dark blue, green, yellow and orange, 250g each.
What settings does UJOY3D give for Hyper PLA+?
UJOY3D lists a 205-220°C nozzle with 210°C for the first layer, a 55-65°C bed and 200-400mm/s.
Is UJOY3D Hyper PLA+ tougher than PLA?
UJOY3D says so, without test figures.
Will the UJOY3D Hyper PLA+ 250g spools fit my holder?
Not always; UJOY3D suggests printing a small-spool adapter.
