As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

XMammal P1P/P1S Hardened Steel Hotend Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

XMammal's kit is a complete replacement hotend for the Bambu Lab P1P and P1S: hardened steel 0.4mm nozzle, heat block, ceramic heater, thermistor and cooling fan in one assembly. The heatbreak is a copper alloy, which XMammal says stops oozing on long prints, and the hotend is rated to 300°C for PLA, PETG, ABS and what it calls specialty materials. XMammal makes bold claims: ±0.008mm tolerance, a 90-second swap and no calibration needed afterwards. Treat the last one with care; running Bambu's calibration after any hotend change costs a few minutes and catches a bad seat. The page never names carbon-fiber filament, although a hardened nozzle is the usual reason to buy one. As a drop-in spare for a P1 whose original hotend is clogged or worn, it covers every part that usually fails. Specs are XMammal's.

What stands out

  • Full P1P/P1S hotend assembly
  • 0.4mm hardened steel nozzle
  • Copper-alloy heatbreak, 300°C

Who it fits

Good fit for

P1P and P1S owners who want a complete spare hotend with a harder nozzle.

Who should skip it

X1 or A1 owners, and anyone who needs 0.2mm or 0.6mm.

Verdict: A complete P1 spare; skip the no-calibration promise.

XMammal P1 hotend specs

P1P / P1S

Listed printers.

0.4mm hardened steel

Fixed nozzle size.

Copper-alloy heatbreak

Anti-ooze claim.

300°C

Maximum temperature.

Fan, thermistor, heater

All included.

±0.008mm

XMammal tolerance claim.

What the XMammal kit replaces

On a P1, the nozzle, heat block, heater and thermistor are serviced as one unit, so a worn nozzle or a dead thermistor both mean a new hotend. XMammal's kit adds a fan too, which helps if the stock fan has started to rattle. The hardened nozzle lasts longer with glow-in-the-dark or filled filament than brass does.

Fitting it on a P1

Cool the printer, remove the front cover, unplug the heater, thermistor and fan, swap the unit and route the leads as before. Then run Bambu's calibration anyway. Choose the XMammal kit if you want a fan included with the hotend; choose the ENOMAKER P1 hotend if you prefer its single-connector heater and thermistor module.

Before you order

Checks for the XMammal P1 hotend.

Check before you buy

  • Your printer is a P1P or P1S
  • A 0.4mm hardened XMammal nozzle suits your filaments
  • You will still run calibration
  • You can route the fan lead

The product at a glance

XMammal Bambu P1P/P1S 0.4mm Hardened Steel Hotend

Best for: P1P and P1S owners

Primary Material
Hardened steel
Maximum Temperature
300°C
Nozzle Diameter
0.4mm

View on Amazon: XMammal Bambu P1P/P1S 0.4mm Hardened Steel Hotend Affiliate link

XMammal complete P1P/P1S hotend: 0.4mm hardened steel, copper-alloy heatbreak, ceramic heater, thermistor and fan, 300°C.

Pros

  • Complete with fan
  • Hardened nozzle
  • Covers common failures

Cons

  • Bold tolerance and speed claims
  • CF filament not named

Good fit if

  • You own a P1P or P1S
  • You want a spare hotend

Skip if

  • You need another nozzle size

Verdict: A practical P1 spare.

Specifications side by side

Spec XMammal Bambu P1P/P1S 0.4mm Hardened Steel Hotend
Primary Material Hardened steel
Maximum Temperature 300°C
Nozzle Diameter 0.4mm
Nozzle Material Hardened Steel

Frequently asked questions

Which printers fit the XMammal hotend?

Bambu Lab P1P and P1S.

What nozzle comes on the XMammal hotend?

A 0.4mm hardened steel nozzle.

Does the XMammal kit include a fan?

Yes, a cooling fan is part of the assembly.

How hot does the XMammal hotend run?

Up to 300°C.

Do I need to calibrate after fitting the XMammal hotend?

XMammal says no, but running calibration after any hotend change is sensible.

See also