As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

BTSEURY Kobra 2 Max X/Y Timing Belt Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

BTSEURY lists this belt for one printer, the Anycubic Kobra 2 Max, as the X and Y drive belt. The large Kobra 2 Max uses long belts that are not cut from a common roll by most owners, so a model-specific listing is useful in principle. The trouble is how little the page says. It names neoprene rubber and calls the belt high strength, quiet, heat and wear resistant, but it gives no length, width or pitch, does not say whether one belt or two are in the bag, and does not mention a fiberglass or steel core. Most GT2 belts rely on that core to resist stretch. Before you order, measure the old belts and message the seller to confirm the count. If it matches, it is an inexpensive way to restore a slipping or frayed Kobra 2 Max axis. We are relaying BTSEURY's page.

What stands out

  • Made for Kobra 2 Max X and Y axes
  • Neoprene rubber
  • Low price

Who it fits

Good fit for

Kobra 2 Max owners who can confirm belt length and count with the seller.

Who should skip it

Anyone who wants a stated fiberglass core or belt dimensions.

Verdict: Right printer, thin page; confirm before buying.

BTSEURY belt specs

Kobra 2 Max

Only listed printer.

X and Y axes

Drive belt use.

Neoprene rubber

Belt body.

Core material

Not stated.

Length / width

Not stated.

Belt count

Not stated.

Why the missing core matters

A belt with no tension member stretches over time, and a stretched belt needs re-tensioning and can cause dimension errors. Good GT2 belts list fiberglass or steel cords. BTSEURY may use one; the page simply does not say.

Fitting on a Kobra 2 Max

Release the tensioner, remove the old belt from the carriage clamp, route the BTSEURY belt the same way and tighten until it twangs evenly on both axes. Choose the BTSEURY belt if it matches your measured length and you want a model-named part; choose a GT2 6mm roll from a brand that states a fiberglass core if you can cut and clamp your own.

Before you order

Checks for the BTSEURY belt.

Check before you buy

  • Your printer is a Kobra 2 Max
  • You know the old Kobra 2 Max belt length
  • The seller confirms how many BTSEURY belts ship
  • You accept no stated core

The product at a glance

BTSEURY Neoprene X Y Axes Timing Belt

Best for: Kobra 2 Max owners

Primary Material
Neoprene Rubber

View on Amazon: BTSEURY Neoprene X Y Axes Timing Belt Affiliate link

BTSEURY neoprene X/Y drive belt for the Kobra 2 Max; no length, width, count or core stated.

Pros

  • Model-specific
  • Low price

Cons

  • No dimensions
  • No stated core
  • Count unknown

Good fit if

  • You own a Kobra 2 Max
  • You confirm length first

Skip if

  • You want full specs

Verdict: Check fit with the seller first.

Specifications side by side

Spec BTSEURY Neoprene X Y Axes Timing Belt
Primary Material Neoprene Rubber
Model BTSEURYeyias9ubw6

Frequently asked questions

Which printer is the BTSEURY belt for?

The Anycubic Kobra 2 Max, X and Y axes.

What is the BTSEURY belt made of?

Neoprene rubber; no core material is named.

How long is the BTSEURY Kobra 2 Max belt?

BTSEURY does not state a length.

Is there one belt or two in the BTSEURY pack?

The page does not say.

Does the BTSEURY belt fit the Kobra 3?

Only the Kobra 2 Max is listed.

See also