VOXELAB Silk+ PLA (Blue, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
VOXELAB Silk+ PLA in blue is a 1kg spool of 1.75mm silk filament pitched as a step up from basic silk: a glossier, chrome-like shine and better bonding between layers, which VOXELAB says cuts the splitting that makes ordinary silk prints brittle. The blue color gives a polished metallic-blue look that suits cosplay armor, toy robots and display pieces. Settings are on the page: 190-220°C at the nozzle and 50-60°C on the bed, with ±0.02mm diameter tolerance and named fit for Ender, Prusa, Bambu Lab and Anycubic printers. The spool arrives vacuum sealed with a drying pack. VOXELAB gives no strength figures for the layer-bond claim, so treat "stronger" as relative to its own basic silk. This review relies on VOXELAB's listing and published specs alone.
What stands out
- Silk+ PLA, chrome-like blue, 1kg
- Nozzle 190-220°C, bed 50-60°C
- ±0.02mm diameter
- Claimed stronger layer bonding than basic silk
- No strength numbers
Who it fits
Good fit for
Cosplay and toy makers who want a shiny metallic blue that holds up to handling better than basic silk.
Who should skip it
Anyone who needs tested strength figures, and buyers after a matte or soft-sheen blue.
Verdict: A chrome-look blue silk with printed settings; the strength claim is unmeasured but the data sheet is better than most.
VOXELAB Silk+ blue: key specs
Chrome-like finish
Glossier and more even than basic silk, per VOXELAB.
Better layer bonding
Meant to reduce splitting and delamination.
190-220°C
Nozzle range given on the listing.
50-60°C bed
Bed range given on the listing.
±0.02mm
Tight diameter control.
Why Silk+ instead of basic silk
Silk PLA gets its shine from additives that also weaken the bond between layers, so thin silk parts can split along a layer line when bent. VOXELAB's Silk+ claims to fix that, which matters for cosplay pieces, toy parts and clips that get handled rather than sitting on a shelf. The listing gives no tensile or impact figures, so the gain cannot be sized. The blue shade reads as polished metal on curves and edges.
Printing VOXELAB Silk+ blue
Start in the 190-220°C band given by VOXELAB, keep the bed at 50-60°C, and try a slightly slower outer wall to raise the gloss. VOXELAB says the spool is ready to print out of the bag; once open, store it with the drying pack, since silk loses shine when it absorbs moisture.
Before buying VOXELAB Silk+ blue
Checks for this spool.
Check before you buy
- A chrome-like blue suits your VOXELAB Silk+ prints
- You can print VOXELAB Silk+ at 190-220°C
- You want sturdier VOXELAB silk parts than basic silk
- You do not need strength figures from VOXELAB
The product at a glance
VOXELAB Silk+ PLA 1.75mm 1kg
Best for: Metallic blue showpieces
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02mm
- Surface Finish
- Silk+
- Printing Technology
- FDM
View on Amazon: VOXELAB Silk+ PLA 1.75mm 1kg Affiliate link
VOXELAB Silk+ PLA blue 1kg: chrome-like shine, claimed stronger layers than basic silk, 190-220°C, 50-60°C bed, ±0.02mm.
Pros
- Printed settings
- ±0.02mm
- Glossy metallic blue
Cons
- No strength data
- Shine depends on tuning
- Blue only on this listing
Good fit if
- You want a shiny VOXELAB blue for cosplay
Skip if
- You need measured VOXELAB strength data
Verdict: A chrome-look blue silk.
Specifications side by side
| Spec | VOXELAB Silk+ PLA 1.75mm 1kg |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | ±0.02mm |
| Surface Finish | Silk+ |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1KG |
| Finish | Silk |
| Weight | 2.2 pounds |
| Color | Silk+blue |
Frequently asked questions
What temperature does VOXELAB Silk+ blue print at?
190-220°C at the nozzle and 50-60°C on the bed, per VOXELAB.
How is VOXELAB Silk+ different from basic silk PLA?
VOXELAB claims a glossier chrome-like finish and stronger layer bonding, with less splitting.
What tolerance does VOXELAB Silk+ blue have?
±0.02mm.
Which printers does VOXELAB name for Silk+?
Ender, Prusa, Bambu Lab and Anycubic models, and most other FDM printers.
Does VOXELAB Silk+ blue need drying?
VOXELAB says it is ready to print out of the vacuum bag.
See also
- chitu systems conjure sculpt resin beige 1kg review
- creality hyper pla peach fuzz filament review
- isanghu asa filament 1 75mm white review
- voxelab pla pro filament review
- voxelab burnt titanium chameleon pla review
- VOXELAB Luminous HS PLA Glow Filament Review (2026)
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
