UGUESS Black TPU 95A Filament 1.75mm Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
UGUESS TPU 95A in black is a 1kg spool of semi-flexible filament for parts that must bend and spring back: watch bands, phone cases, shoe insoles, bumpers, rubber feet and robot grippers. Black is the practical choice for anything worn or handled, since it hides scuffs and dirt that show on bright TPU. The listing is unusually complete. It gives a 190-230°C nozzle, 50-60°C bed and 50-120mm/s, recommends drying the spool for 7 hours before use, and says each spool is pre-dried for 24 hours at the factory and vacuum sealed with desiccant. Tolerance is ±0.03mm. UGUESS also claims abrasion, oil and aging resistance, without test figures. The top of that speed range is optimistic for flexible filament on Bowden printers; a direct drive extruder makes TPU far easier. We compared UGUESS' listing and published specs; we did not print with it.
What stands out
- Shore 95A semi-flexible TPU
- 190-230°C nozzle, 50-60°C bed
- 50-120mm/s
- Dry 7h before use
- ±0.03mm, vacuum sealed
Who it fits
Good fit for
Direct drive printer owners who want black TPU with published settings for straps, cases, feet and grips.
Who should skip it
Bowden-only printer owners who are not ready to slow right down, and anyone needing softer than 95A.
Verdict: A well-documented black 95A TPU for everyday flexible parts.
UGUESS black TPU 95A specs
Shore 95A
Firm-flexible: bends and rebounds but holds shape.
190-230°C / 50-60°C
Nozzle and bed ranges from UGUESS.
50-120mm/s
Upper end needs a direct drive extruder.
Dry 7h before use
UGUESS's advice, on top of a 24h factory pre-dry.
Black, 1kg
Hides scuffs on handled and worn parts.
Where black UGUESS TPU makes sense
Worn and handled parts get dirty, and black TPU hides it: watch straps, tool grips, camera and phone bumpers, and anti-slip feet under printers or furniture. UGUESS lists oil resistance, which also suits gaskets and covers near machines, though no test data is given.
Printing UGUESS black TPU 95A
Dry the spool for the 7 hours UGUESS advises, then start near 50mm/s and raise speed only once walls look clean. Turn retraction down to limit stringing, and keep the path from extruder to nozzle tight. Store the opened spool in an airtight box with its desiccant.
Before buying UGUESS black TPU 95A
Checks.
Check before you buy
- Your printer handles UGUESS 95A TPU, ideally via direct drive
- You can dry UGUESS TPU for 7 hours
- Your parts suit firm 95A flexibility
The product at a glance
UGUESS TPU 95A 1.75mm Filament
Best for: Flexible worn parts
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 120 mm/s
- Dimensional Accuracy
- +/- 0.03mm
- Shore Hardness
- 95A
View on Amazon: UGUESS TPU 95A 1.75mm Filament Affiliate link
UGUESS black TPU 95A 1kg: 190-230°C, 50-60°C bed, 50-120mm/s, dry 7h, ±0.03mm; scuff-hiding black for worn parts.
Pros
- Complete print settings
- Pre-dried and vacuum sealed
- Black hides wear on handled parts
Cons
- 120mm/s is ambitious for TPU
- Resistance claims have no data
- Bowden printers will struggle
Good fit if
- You print straps, grips or bumpers
Skip if
- You need softer than 95A
Verdict: A documented black TPU for flexible parts.
Specifications side by side
| Spec | UGUESS TPU 95A 1.75mm Filament |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 120 mm/s |
| Dimensional Accuracy | +/- 0.03mm |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Size | 1KG |
| Application | Functional Parts |
| Surface Finish | Smooth |
| Dimensions | 8.5 × 8.11 × 2.8 inches |
| Weight | 2.2 pounds |
| Color | Tpu Black 1kg |
Frequently asked questions
What settings does UGUESS give for black TPU 95A?
190-230°C nozzle, 50-60°C bed, 50-120mm/s.
Should UGUESS black TPU be dried before use?
Yes, UGUESS recommends 7 hours of drying even though spools are pre-dried.
What can black UGUESS TPU 95A print?
Watch bands, phone cases, insoles, bumpers, feet and flexible robot parts.
Does UGUESS black TPU need direct drive?
It is not stated; flexible TPU prints far more reliably with direct drive.
See also
- sovol sv08 metal glass enclosure review
- koyofei ender 3 v3 ke belt kit review
- elegoo mars 4 ultra build plate review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
