SUNLU PLA+ Refill 4kg (White x4) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This SUNLU pack is four 1kg coils of white PLA+ with no spools, made to load onto a reusable spool. It suits a specific buyer: someone who prints a lot of white parts, already owns compatible reusable spools, and wants less plastic waste. SUNLU says the coils fit its 2025 reusable spool and Bambu Lab's spool, and run in an AMS or AMS Lite once loaded; they do not fit SUNLU's second-generation detachable spool, so check which one you have. Settings are 210-235°C at the nozzle with a 55-65°C bed. SUNLU claims PLA+ is three times stronger than its standard PLA, with better layer adhesion, and the coils are neatly wound to avoid knots. Four of one color makes this a stock-up pack for enclosures, organizers, prototypes and anything you plan to paint. No tolerance figure appears on this listing. We put this together from SUNLU's listing and stated settings, not from printing the coils.
What stands out
- 4×1kg white PLA+ coils, no spool
- Loads onto SUNLU 2025 or Bambu Lab reusable spools
- Not for SUNLU 2nd-gen spool
- 210-235°C nozzle, 55-65°C bed
- AMS / AMS Lite once spooled
Who it fits
Good fit for
Bambu Lab or SUNLU reusable-spool owners who go through a lot of white PLA+ for parts, prototypes or paint bases.
Who should skip it
Anyone without a compatible reusable spool, or owners of SUNLU's second-generation detachable spool.
Verdict: A stock-up pack of white PLA+ for printers that already have the right spools.
SUNLU white PLA+ refill specs
4×1kg white coils
One color in bulk for repeat jobs.
SUNLU 2025 + Bambu spools
The reusable spools SUNLU names.
210-235°C / 55-65°C
SUNLU's PLA+ settings.
3× stronger than PLA
SUNLU's own claim for PLA+.
No tolerance stated
Not given on this refill listing.
How the SUNLU white refill loads
Each coil drops onto a reusable spool core; SUNLU says its third-generation spool has marked alignment points that snap into place. Once on a Bambu Lab or SUNLU 2025 spool, the coil runs in an AMS or AMS Lite like a normal spool. White is the base color for painting and for parts where you want neutral, plain finishes.
Printing white SUNLU PLA+
Start mid-range at about 220°C with a 60°C bed, inside SUNLU's 210-235°C and 55-65°C windows. Keep spare coils in their bags until needed. Buying four whites only pays off if you use one color heavily; if you want a mix, SUNLU sells a four-color refill pack too.
Before buying the SUNLU white refill
Checks.
Check before you buy
- You own a SUNLU 2025 or Bambu Lab reusable spool
- Your spool is not SUNLU's 2nd-gen detachable type
- You use 4kg of white SUNLU PLA+
The product at a glance
SUNLU PLA Plus Filament Refill 4KG
Best for: Bulk white PLA+
- Material Type
- PLA+
- Filament Diameter
- 1.75mm
- Net Weight
- 4KG
- Weight
- 8.82 pounds
View on Amazon: SUNLU PLA Plus Filament Refill 4KG Affiliate link
SUNLU PLA+ refill, 4×1kg white, spool-free: fits SUNLU 2025 and Bambu Lab spools, AMS-ready once loaded, 210-235°C, 55-65°C bed.
Pros
- Four whites for bulk use
- Less spool waste
- AMS-ready on the right spool
Cons
- Needs a reusable spool
- Not for SUNLU 2nd-gen spool
- No tolerance figure
Good fit if
- You print lots of white parts on a Bambu printer
Skip if
- You have no reusable spool for SUNLU refill coils
Verdict: A bulk white PLA+ refill for reusable-spool owners.
Specifications side by side
| Spec | SUNLU PLA Plus Filament Refill 4KG |
|---|---|
| Material Type | PLA+ |
| Filament Diameter | 1.75mm |
| Net Weight | 4KG |
| Compatible Material | PLA |
| Weight | 8.82 pounds |
| Size | Pla+ Refill |
| Color | White+white+white+white |
| Model | PLA Plus Filament Refill |
Frequently asked questions
Does the SUNLU white PLA+ refill fit Bambu Lab spools?
Yes, SUNLU names Bambu Lab's reusable spool and its own 2025 spool.
Can this SUNLU refill run in an AMS?
Yes, once it is loaded on a compatible spool, in AMS or AMS Lite.
What temperatures does SUNLU give for this PLA+ refill?
210-235°C nozzle and 55-65°C bed.
Which SUNLU spool does the white refill not fit?
SUNLU's second-generation detachable spool.
See also
- sunlu water washable resin grey 1kg review
- amolen 95a glow in the dark tpu filament review
- gizmo dorks tpu filament 200g red review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- caldigit ts5 plus review
- lenovo chromebook plus review
