Sovol SV08 Max Metal and Glass Enclosure Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Sovol built this metal-frame, tempered-glass enclosure for one printer, the large-format SV08 Max, and it ships with a drag chain and a filter fan. Sovol says it blocks 99% of fumes, cuts noise, and assembles in about 15 minutes. The headline caveat is in the first bullet: once it is fitted, you can no longer print the full 500mm height; Sovol offers STL files for a height-raising kit on request. The listing is also mixed on what kind of enclosure this is: the title says open while a bullet calls it sealed, and its warm-chamber claim depends on a heating module the page does not include. At around $220, it suits SV08 Max owners printing ABS or ASA in a shared room. Details are drawn from Sovol's listing.
What stands out
- Matched to the SV08 Max frame
- Drag chain and filter fan included
- Assembly in about 15 minutes
Who it fits
Good fit for
SV08 Max owners who print ABS, ASA or other warp-prone materials, or who share a room with the printer and want less noise and fewer fumes.
Who should skip it
Owners who regularly use the full 500mm Z height and do not want to print extra riser parts, and anyone expecting a heated chamber out of the box: the heating module is mentioned but not listed as included.
Verdict: The official way to box in an SV08 Max, with a real height trade-off and a few listing gaps to clear up first.
Enclosure specs, explained
Metal frame, tempered glass
Rigid, heat-tolerant panels that let you watch the print.
Filter fan, 99% fume claim
Sovol's figure; no filter type or rating is named.
Drag chain
Guides cables and tubes inside the enclosure.
28 x 27.6 x 29.5in
Outer size from the spec block; plan bench space for it.
Open or sealed?
The title calls it an open enclosure, yet the bullets describe a sealed unit that blocks fumes and holds heat. The page also lists no weight, no door count and no filter type. Ask Sovol which version ships before relying on the fume figure.
Living with it
Assembly takes around 15 minutes per Sovol. Expect to lose part of the Z travel unless you print and fit the height-increasing parts Sovol shares on request. Warm-chamber benefits for ABS need the separate heating module.
Before buying
Checks.
Check before you buy
- Your printer is the SV08 Max, not the SV08
- You can live without full 500mm prints
- You know whether the heating module is extra
- You have room for a 28-inch-wide box
The product at a glance
Sovol SV08 Max Metal and Glass Enclosure
Best for: SV08 Max owners
- Primary Material
- Metal and Tempered Glass
- Color
- Black
- Dimensions
- 28 × 27.6 × 29.5 inches
View on Amazon: Sovol SV08 Max Metal and Glass Enclosure Affiliate link
Sovol SV08 Max enclosure: metal frame with tempered glass, drag chain and filter fan, assembles in about 15 minutes; limits the 500mm print height unless you add Sovol's riser parts.
Pros
- Purpose-built for the SV08 Max
- Cuts fumes and noise per Sovol
- Quick to assemble
Cons
- Loses full 500mm height
- Open vs sealed wording conflicts
- Heater not listed as included
Good fit if
- You print ABS on an SV08 Max
- Your printer sits in a living space
Skip if
- You print 500mm-tall parts
- You expect a heated chamber in the box
Verdict: The official enclosure for SV08 Max owners who accept the height loss.
Specifications side by side
| Spec | Sovol SV08 Max Metal and Glass Enclosure |
|---|---|
| Primary Material | Metal and Tempered Glass |
| Color | Black |
| Dimensions | 28 × 27.6 × 29.5 inches |
| Model | 8MAX-FBTJ |
Frequently asked questions
Does the Sovol SV08 Max enclosure reduce build height?
Yes. Sovol says 500mm-tall prints are not possible with it fitted, and offers height-raising STL files on request.
Is a heater included with the Sovol SV08 Max enclosure?
The listing refers to a heating module but does not list one in the box.
Will the SV08 Max enclosure fit the regular Sovol SV08?
No. It is listed for the SV08 Max only.
How long does the Sovol SV08 Max enclosure take to build?
About 15 minutes, according to Sovol.
Featured in
See also
- sovol 5 ips50 hdmi capacitive review
- original prusa xl enclosure review
- original prusa drybox filament storage system review
- sovol creality capricorn 2 meters review
- sovol 3d printer tools kit review
- Capricorn XS 1m PTFE Tube Kit Review (2026)
- Sovol SV08 Metal and Tempered Glass Enclosure Review (2026)
- thermaltake versa h18 tempered glass review
- empava 30 inch tempered glass gas review
