Sovol SH02 Filament Dryer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Sovol SH02 is a sealed dry box that heats two 1kg spools at once and feeds both out through PTFE ports, so you can dry and print in one step. A 150W PTC heater and fan circulate warm air; Sovol says it reaches 50°C in 7 minutes and 70°C in 25, with any setting from 40 to 70°C. A touch screen offers one-key presets for nine filaments: PLA, TPU, PETG, ABS, ASA, PVA, PC, PA and PP. Sealing is thicker than the SH01's, and there is room for four desiccant bags (not included). The limit to know: 70°C is below the drying temperatures some nylon and carbon fiber spools ask for. Facts here are from Sovol's listing.
What stands out
- Dries two 1kg spools at once
- 150W PTC heater, 40-70°C
- One-key presets for 9 filaments
Who it fits
Good fit for
FDM owners who print PETG, TPU, PVA or nylon blends from a damp room, and who want to print straight from a heated, sealed box with two spools at a time.
Who should skip it
Owners of engineering filaments whose makers call for 80°C or more, and anyone who wants more than two spools in one box.
Verdict: A practical two-spool dryer for everyday filaments; check your hottest filament's drying temperature against the 70°C ceiling.
Sovol SH02 specs
Two 1kg spools
Dry and feed two filaments, or serve two printers.
150W PTC heater with fan
50°C in about 7 minutes, 70°C in about 25 (Sovol figures).
40-70°C adjustable
Covers PLA, PETG, TPU and ABS; some nylons want more.
Presets for 9 filament types
PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP with set time and temperature.
Two PTFE feed holes
Print directly from the box; hole position suits several extruder layouts.
Safety cut-off and fan alarm
Heater stops above 130°C PTC temperature; an alarm sounds if the fan stops.
Box and sealing
The SH02 measures about 9.84 by 6.89 by 11.1 inches and weighs 2.87 pounds, in metal grey. Sovol uses thicker seals than on the SH01 so the box keeps moisture out even when switched off. It takes 1.75mm and 2.85mm filament. Desiccant is not included; there is space for four bags.
Drying and printing
Pick the filament type on the touch screen and the box applies Sovol's preset time and temperature, or set 40-70°C by hand. Run PTFE tubes from the two holes to your printer or printers and print while the heater keeps the spools dry. For nylon or CF filaments that call for 80°C or more, expect longer runs or a hotter dryer.
Before you buy
Sovol SH02 checklist.
Check before you buy
- Your filaments dry at 70°C or less
- You want to print straight from the dryer
- Two spools at a time is enough
- You will add your own desiccant bags
The product at a glance
Sovol SH02 Filament Dryer 2 KG
Best for: Drying while printing
- Compatible Material
- PLA, PETG, ABS, TPU
- Dimensions
- 9.84 × 6.89 × 11.1 inches
- Weight
- 2.87 pounds
View on Amazon: Sovol SH02 Filament Dryer 2 KG Affiliate link
Sovol SH02 filament dryer: two 1kg spools, 150W PTC heater with fan, 40-70°C, 9 filament presets, two PTFE feed holes, 130°C PTC cut-off and fan alarm, 1.75/2.85mm, 2.87 lb; desiccant not included.
Pros
- Dries and feeds two spools
- Quick heat-up
- Presets for 9 materials
Cons
- Tops out at 70°C
- Desiccant not included
Good fit if
- You print PETG, TPU or PVA in humid air
- You want to print from the dryer
Skip if
- Your nylon needs 80°C+
Verdict: A two-spool dryer box for everyday filaments.
Specifications side by side
| Spec | Sovol SH02 Filament Dryer 2 KG |
|---|---|
| Compatible Material | PLA, PETG, ABS, TPU |
| Dimensions | 9.84 × 6.89 × 11.1 inches |
| Weight | 2.87 pounds |
| Size | 1 KG |
| Color | Metal Gray |
Frequently asked questions
How hot does the Sovol SH02 get?
40-70°C, set by hand or by preset; Sovol says 70°C takes about 25 minutes.
How many spools fit in the Sovol SH02?
Two 1kg spools.
Which filaments have presets on the SH02?
PLA, TPU, PETG, ABS, ASA, PVA, PC, PA and PP.
Can I print while the SH02 is drying?
Yes, two holes let PTFE tubes feed filament out to the printer.
Sovol SH02 or SH01?
Sovol lists a 150W PTC heater and better sealing on the SH02; choose the SH02 for faster heat-up and an airtight box when idle.
