Shion.Kwoo Hi Combo 265x280mm Build Plate 2-Pack Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
For Creality Hi Combo owners, this Shion.Kwoo set covers two jobs. It includes two 265x280mm spring plates in 0.4mm stainless steel: one double-sided smooth plate with a carbon-fiber pattern on its PET side and a large diamond pattern on its PEO side, and one textured PEI plate. The patterned sides press their texture into the bottom of a print without changing the filament color, which is the main reason to choose them. Shion.Kwoo recommends the PET and PEO sides for PLA and PETG and suggests PEI or glue for ABS, so the textured PEI plate is the one for hotter materials; the title also names TPU and PC. The listing says the plates are sized for the Hi Combo, but it does not mention a magnetic base. Plate details are from Shion.Kwoo's listing.
What stands out
- Two plates: PET/PEO smooth plus textured PEI
- 265x280mm, 0.4mm stainless steel
- Patterned first-layer finishes
Who it fits
Good fit for
Creality Hi Combo owners who want patterned bottoms on PLA and PETG parts plus a textured PEI plate for ABS.
Who should skip it
Owners of other printers, and anyone who only needs one plain textured PEI sheet.
Verdict: Good value as a pair for the Hi Combo if the patterned finishes appeal.
Shion.Kwoo Hi Combo 2-pack specs
265x280mm
Sized for the Hi Combo.
0.4mm stainless steel
Resists bending and rust.
PET side: carbon pattern
For PLA and PETG.
PEO side: diamond pattern
For PLA and PETG.
Textured PEI plate
For ABS and hotter filaments.
Magnetic base
Not mentioned.
Three surfaces, two plates
The smooth plate gives two patterned finishes, one per side, and both keep the filament's own color rather than tinting it. They grip PLA and PETG well when clean but are not Shion.Kwoo's pick for ABS. The textured PEI plate fills that gap and hides minor marks on the first layer. Watch the nozzle gap on the patterned sides: Shion.Kwoo warns that a nozzle set too low can scar them for good.
Care
Clean with 75% alcohol or mild soapy water; Shion.Kwoo says stubborn residue can be scrubbed gently with a soft brush after warming the plate. Dry filament helps adhesion on all three surfaces. Choose this set if you want patterned bottoms and a PEI plate together; choose Creality's own textured PEI plate for the Hi if you only print on PEI.
Before you order
Checks for the Shion.Kwoo Hi Combo plate set.
Check before you buy
- Your printer is a Creality Hi Combo
- Most of your Hi Combo prints are PLA or PETG
- You want patterned print bottoms
- You will set the Z offset with care
The product at a glance
Shion.Kwoo 265x280mm Textured Build Plate 2-Pack
Best for: Creality Hi Combo
- Primary Material
- stainless steel
- Dimensions
- 265x280mm
- Build Surface Type
- textured PEI, smooth
- Compatible Material
- PLA, PETG, ABS, TPU
- Features
- Carbon Fiber
- Color
- Black
View on Amazon: Shion.Kwoo 265x280mm Textured Build Plate 2-Pack Affiliate link
Shion.Kwoo 2-pack for the Creality Hi Combo: a carbon-fiber PET / diamond PEO smooth plate and a textured PEI plate, 265x280mm, 0.4mm steel.
Pros
- Three surfaces in one set
- Patterned PLA and PETG bottoms
- Stainless steel plates
Cons
- Patterned sides scar if the nozzle is low
- Hi Combo fit only
Good fit if
- You own a Creality Hi Combo
- You like textured print bottoms
Skip if
- You only need plain PEI
Verdict: A well-chosen pair for Hi Combo owners.
Specifications side by side
| Spec | Shion.Kwoo 265x280mm Textured Build Plate 2-Pack |
|---|---|
| Primary Material | stainless steel |
| Dimensions | 265x280mm |
| Build Surface Type | textured PEI, smooth |
| Compatible Material | PLA, PETG, ABS, TPU |
| Features | Carbon Fiber |
| Color | Black |
| Build Plate Material | PEI |
| Surface Finish | Smooth, Textured |
| Size | 265x280mm |
If you are also outfitting a workshop with security gear, our dsc le4000e at pack of 2 review covers that alarm communicator's specs and who it suits.
Frequently asked questions
Which printer do the Shion.Kwoo 265x280mm plates fit?
The Creality Hi Combo, according to the listing.
What surfaces are in the Shion.Kwoo Hi Combo 2-pack?
A smooth plate with carbon-fiber PET and diamond PEO sides, and a textured PEI plate.
Can I print ABS on the Shion.Kwoo PET/PEO plate?
Shion.Kwoo recommends PEI or glue for ABS, so use the textured PEI plate.
How thick are the Shion.Kwoo Hi Combo plates?
0.4mm stainless steel.
How do I clean the Shion.Kwoo PET and PEO sides?
With 75% alcohol or mild soapy water.
