Shion.Kwoo Creality K2 PET/PEO Build Plate (270x293mm) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Shion.Kwoo's plate is a 270x293mm spring steel sheet for the Creality K2, with a different textured film on each side: a PET carbon-fiber pattern and a PEO diamond pattern. Both print a decorative texture into the underside of a part, which is the main reason to buy it over a plain smooth PEI sheet: nameplates, coasters, lids and flat signs come off with a finished look. The listing title says "Smooth", but the bullets describe both faces as patterned, so expect texture on either side. The core is 0.4mm stainless spring steel, flexed to pop prints off once the plate has cooled. Shion.Kwoo rates both surfaces for PLA and PETG and says nothing about ABS, ASA or TPU. The magnetic base is not included, so it relies on the K2's own bed. No maximum bed temperature is given. This review draws on Shion.Kwoo's listing and published specs; we did not print on the sheet.
What stands out
- 270x293mm sheet for the Creality K2
- PET carbon-fiber pattern side
- PEO diamond pattern side
- 0.4mm stainless spring steel
- Rated for PLA and PETG only
Who it fits
Good fit for
Creality K2 owners who print flat-bottomed PLA or PETG parts and want a carbon-fiber or diamond texture on the visible face.
Who should skip it
K2 owners who print ABS, ASA or TPU, anyone wanting a truly smooth glossy bottom, and owners of other printers.
Verdict: A decorative-finish spare sheet for the K2, limited to PLA and PETG.
Shion.Kwoo K2 plate specs
270x293mm
Cut for the Creality K2 bed.
PET carbon-fiber side
Leaves a woven-look texture on the first layer.
PEO diamond side
Leaves a geometric diamond pattern.
0.4mm spring steel
Flex the cooled sheet to release parts.
No magnetic base
Uses the K2's existing magnetic bed.
Two textures on one K2 sheet
Having both films on one plate means flipping the sheet changes the finish without buying a second plate. Patterned films also hide minor first-layer marks better than a glossy surface. The trade-off is that neither side gives a mirror-smooth bottom, so a K2 owner who wants that still needs a smooth sheet.
Printing on the Shion.Kwoo K2 plate
Let the plate cool to room temperature, then bend it gently to release the print, as the listing advises, instead of scraping. Clean both faces with 70-75% isopropyl alcohol or mild soap and water and dry them fully. Shion.Kwoo suggests re-checking Z-offset and slowing the first layer or raising bed temperature for damp filament, complex models or high-speed jobs.
Before buying the Shion.Kwoo K2 PET/PEO plate
Checks.
Check before you buy
- Your printer is a Creality K2 with a magnetic bed
- You print PLA or PETG on the K2
- You want a textured finish, not glossy, on K2 prints
The product at a glance
Shion.Kwoo K2 270x293mm PET PEO Build Plate
Best for: K2 decorative finishes
- Primary Material
- Stainless spring steel
- Dimensions
- 270x293mm
- Build Surface Type
- Smooth PET PEO
- Features
- Carbon Fiber
- Build Plate Material
- Spring Steel, PEO
View on Amazon: Shion.Kwoo K2 270x293mm PET PEO Build Plate Affiliate link
Shion.Kwoo 270x293mm spring steel plate for the Creality K2 with carbon-fiber PET and diamond PEO textures, for PLA and PETG, no magnetic base.
Pros
- Two decorative textures
- Flex release on 0.4mm steel
- Cleans with IPA or soap
Cons
- PLA and PETG only
- No bed temperature limit given
- Title says smooth, bullets say textured
Good fit if
- You want patterned bottoms on K2 PLA prints
Skip if
- You print ABS or TPU on the K2
Verdict: A two-texture spare sheet for the Creality K2.
Specifications side by side
| Spec | Shion.Kwoo K2 270x293mm PET PEO Build Plate |
|---|---|
| Primary Material | Stainless spring steel |
| Dimensions | 270x293mm |
| Build Surface Type | Smooth PET PEO |
| Features | Carbon Fiber |
| Build Plate Material | Spring Steel, PEO |
| Surface Finish | Smooth |
| Size | 270x293mm |
Frequently asked questions
Does the Shion.Kwoo 270x293mm plate fit the Creality K2?
Yes, the listing says it is made for the Creality K2.
Is the Shion.Kwoo K2 plate smooth or textured?
Both sides are textured: carbon-fiber PET and diamond PEO, despite the word smooth in the title.
Which filaments does the Shion.Kwoo K2 plate support?
PLA and PETG, per the listing.
Does the Shion.Kwoo K2 sheet include a magnetic base?
No, the magnetic base is not included.
