As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Olzzdda Neptune 4 Plus/Max Hotend Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

When a Neptune 4 Plus or 4 Max clogs at the heat break or the thermistor fails, a complete hotend is often quicker than chasing the fault. Olzzdda's kit is an assembled all-metal hotend for the 4 Plus and 4 Max only (not the Neptune 4 or 4 Pro), with heater block, ceramic heater, thermistor and an aluminum heatsink already fitted. Two hardened steel nozzles come with it, 0.4mm and 0.6mm. Olzzdda rates it to 300°C and lists PLA, PETG, ABS, TPU and nylon. The listing calls it plug and play: remove the old unit and fit the new one. It does not say which nozzle is fitted on arrival or give the heater wattage. At this price it is a cheap way to keep a spare hotend for the larger Neptune 4 models. Our notes are from Olzzdda's listing.

What stands out

  • Assembled all-metal hotend
  • Spare 0.4mm and 0.6mm hardened steel nozzles
  • Rated to 300°C

Who it fits

Good fit for

Neptune 4 Plus and 4 Max owners who want a complete spare hotend.

Who should skip it

Owners of the Neptune 4 or 4 Pro, and anyone who wants Elegoo's own part.

Verdict: A cheap complete hotend for the large Neptune 4 models.

Olzzdda Neptune hotend specs

Neptune 4 Plus / 4 Max

Not N4 or N4 Pro.

All-metal, assembled

Heater, thermistor, heatsink fitted.

300°C

Listed maximum.

2 hardened steel nozzles

0.4mm and 0.6mm.

Ceramic heater

Faster, even heating.

Materials

PLA, PETG, ABS, TPU, nylon.

Complete unit versus nozzles

A nozzle kit fixes a worn tip; a full hotend also replaces the heat break, heater and thermistor, the parts that cause heat creep and temperature errors. The spare 0.6mm hardened steel nozzle adds a faster, coarser option and handles abrasive filament better than brass.

Fitting it

Power down, unplug the heater and thermistor leads, unscrew the old hotend and fit the new one, then run a PID tune and set the Z offset again. Choose the Olzzdda hotend for a cheap complete spare; choose Elegoo's official Neptune 4 Plus/Max hotend kit if you want the factory part and support from Elegoo.

Before you order

Checks for the Olzzdda Neptune hotend.

Check before you buy

  • You own a Neptune 4 Plus or Max needing a full hotend
  • You can reconnect heater and thermistor leads
  • You will re-run PID and Z offset
  • You want spare steel nozzles

The product at a glance

Olzzdda Neptune 4 Plus and Max All-Metal Hotend

Best for: Neptune 4 Plus and Max

Maximum Temperature
300°C
Nozzle Diameter
0.4mm, 0.6mm
Nozzle Material
Hardened Steel

View on Amazon: Olzzdda Neptune 4 Plus and Max All-Metal Hotend Affiliate link

Olzzdda assembled all-metal hotend for the Neptune 4 Plus/Max, 300°C, with 0.4mm and 0.6mm hardened steel nozzles.

Pros

  • Complete, assembled unit
  • Two steel nozzles included
  • Low price

Cons

  • Plus and Max only
  • Fitted nozzle and wattage not stated

Good fit if

  • You own a Neptune 4 Plus or Max
  • You want a spare hotend

Skip if

  • Your Neptune is the base 4 or the 4 Pro

Verdict: A good-value spare hotend.

Specifications side by side

Spec Olzzdda Neptune 4 Plus and Max All-Metal Hotend
Maximum Temperature 300°C
Nozzle Diameter 0.4mm, 0.6mm
Nozzle Material Hardened Steel

Frequently asked questions

Does the Olzzdda hotend fit the Neptune 4 Pro?

No, Olzzdda lists the Neptune 4 Plus and 4 Max only.

Which nozzles come with the Olzzdda hotend?

Two hardened steel nozzles, 0.4mm and 0.6mm.

How hot can the Olzzdda Neptune hotend go?

Up to 300°C, per the listing.

Which filaments does Olzzdda list?

PLA, PETG, ABS, TPU and nylon.

Is the Olzzdda hotend assembled?

Yes, it is sold as an assembled kit.

See also