ENOMAKER P1P/P1S Hardened Steel Hotend Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Bambu Lab's P1 hotend joins the nozzle and heat block in one piece, so replacing a worn nozzle means replacing the whole hotend. ENOMAKER's version for the P1P and P1S is a full assembly with a 0.4mm hardened steel nozzle, heat block, ceramic heater, thermistor and fan. The heater and thermistor sit in one module with a single connector, which ENOMAKER says is more reliable than separate leads. It heats to 300°C, and the fan shuts off if it locks, retrying after a few seconds. The listing names only PLA and PETG; it does not list carbon fiber or glow filament, although hardened steel is usually chosen for those. For a P1 owner whose brass nozzle is worn, it is a straightforward replacement. Specs follow ENOMAKER's listing.
What stands out
- Complete P1P/P1S hotend
- 0.4mm hardened steel integrated nozzle
- Combined heater and thermistor module
Who it fits
Good fit for
Bambu Lab P1P and P1S owners replacing a worn or clogged hotend.
Who should skip it
X1 or A1 owners, and anyone who needs a different nozzle size.
Verdict: A complete P1 hotend with a wear-resistant nozzle.
ENOMAKER P1 hotend specs
P1P / P1S
Listed printers.
0.4mm hardened steel
Integrated nozzle.
300°C
Maximum heat.
Heater + thermistor
One module, one connector.
Fan included
Auto-shutoff when locked.
Materials
PLA, PETG listed.
Integrated nozzle design
With the nozzle built into the heat block and joined to the heatsink by a thin metal tube, the hotend heats quickly and has no nozzle thread to leak. The trade-off is that the nozzle cannot be swapped alone. Hardened steel conducts heat less than brass, so a small increase in nozzle temperature can help at high flow.
Swapping it
Let the printer cool, disconnect the single heater-thermistor plug and the fan, and swap the unit following Bambu Lab's P1 hotend guide. Run the calibration after fitting. Choose the ENOMAKER hardened steel hotend for a wear-resistant 0.4mm; choose a brass P1 hotend if you only print PLA and PETG and want the best heat transfer.
Before you order
Checks for the ENOMAKER P1 hotend.
Check before you buy
- Your printer is a P1P or P1S
- You want a 0.4mm nozzle
- You will run calibration after fitting
- You know the listing names only PLA and PETG
The product at a glance
ENOMAKER P1P/P1S 0.4mm Hardened Steel Hotend Kit
Best for: P1P and P1S owners
- Primary Material
- Hardened Steel
- Maximum Temperature
- 300℃
- Nozzle Diameter
- 0.4mm
View on Amazon: ENOMAKER P1P/P1S 0.4mm Hardened Steel Hotend Kit Affiliate link
ENOMAKER complete P1P/P1S hotend: 0.4mm hardened steel integrated nozzle, ceramic heater, combined thermistor module, fan, 300°C.
Pros
- Full assembly
- Hardened steel nozzle
- Single connector module
Cons
- Abrasives not named
- 0.4mm only
Good fit if
- You own a P1P or P1S
- Your hotend is worn
Skip if
- You own an X1 or A1
Verdict: A solid hardened steel spare for P1 printers.
Specifications side by side
| Spec | ENOMAKER P1P/P1S 0.4mm Hardened Steel Hotend Kit |
|---|---|
| Primary Material | Hardened Steel |
| Maximum Temperature | 300℃ |
| Nozzle Diameter | 0.4mm |
| Nozzle Material | Hardened Steel |
| Size | P1 hotend 0.4mm Hardened |
Frequently asked questions
Which printers fit the ENOMAKER hardened steel hotend?
The Bambu Lab P1P and P1S.
Can I replace only the nozzle on the ENOMAKER P1 hotend?
No, the nozzle is integrated into the heat block.
How hot does the ENOMAKER P1 hotend get?
Up to 300°C.
Does the ENOMAKER hotend include a fan?
Yes, with an auto-shutoff if the fan locks.
Which filaments does ENOMAKER list for this hotend?
PLA and PETG; abrasive filaments are not named.
See also
- topcube bambu lab a1 combo enclosure review
- gfdoso photon mono 4 screen protector 8 pack review
- cregrant3d skouphy resin printer enclosure review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- ducky one 3 mini 60 review
- best PHILIPS headphones
