Jucoole Blue TPU 95A 1kg Filament Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Jucoole TPU 95A in blue is a 1kg flexible spool for phone cases, watch bands, drone guards and other parts that bend again and again. Its one hard number is 500% elongation, meaning a strand can stretch well past its length before it breaks, which backs up the claim that parts flex without cracking. Tolerance is ±0.03mm and the spool is vacuum sealed with desiccant. The listing gives no nozzle, bed or speed settings and does not mention direct drive or Bowden, so expect to tune it like any 95A TPU.
What stands out
- Shore 95A, blue, 1kg
- 500% elongation
- No settings listed
Who it fits
Good fit for
Makers who want a colored TPU for cases, straps and protective parts and are comfortable tuning flexible filament.
Who should skip it
First-time TPU users who need a settings block, or anyone wanting a black or clear flexible part.
Verdict: A stretchy blue TPU with one solid number; bring your own profile.
Jucoole blue TPU specs
Shore 95A
Common firm-flexible grade.
500% elongation
Stretches far before breaking.
±0.03mm
Slightly loose tolerance.
Model JCLTPU001
Listed part number.
Vacuum sealed with desiccant
Keeps moisture out.
No temps or speed
Tune on a test print.
What 500% elongation means
Elongation at break tells you how far a material stretches before snapping. At 500%, Jucoole's TPU suits straps, watch bands and snap-fit covers that are pulled on and off. Jucoole also claims low warping and strong layer bonding, which matter for tall flexible parts like bumpers.
Dialing in the blue spool
With no settings published, print a small test cube at slow speed, lower retraction and a dry spool, then raise speed until the walls start to string. A direct-drive extruder makes this much easier. Choose blue for visible straps and cases; for parts that should stay clean-looking, black hides wear better.
Before you buy
Questions for the Jucoole blue TPU.
Check before you buy
- You can tune TPU without listed settings
- Your extruder handles soft filament
- Blue suits the parts
- ±0.03mm is acceptable
The product at a glance
Jucoole 1kg Blue TPU 95A Filament
Best for: Blue flexible straps and cases
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Shore Hardness
- 95A
- Printing Technology
- FDM
- Color
- Blue
View on Amazon: Jucoole 1kg Blue TPU 95A Filament Affiliate link
Jucoole TPU 95A blue, 1kg: 500% elongation, ±0.03mm, vacuum sealed; no temperatures, speed or extruder advice.
Pros
- 500% elongation stated
- Bright blue for visible parts
- Sealed with desiccant
Cons
- No print settings
- No extruder guidance
Good fit if
- You print bands or cases
- You can tune TPU
Skip if
- You need a settings block
Verdict: A stretchy blue TPU for tuned printers.
Specifications side by side
| Spec | Jucoole 1kg Blue TPU 95A Filament |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Shore Hardness | 95A |
| Printing Technology | FDM |
| Compatible Material | TPU |
| Color | Blue |
| Size | 1KG |
| Weight | 2.2 pounds |
| Model | JCLTPU001 |
Frequently asked questions
What hardness is Jucoole TPU?
Shore 95A.
How stretchy is Jucoole TPU 95A?
The listing gives 500% elongation.
What temperature should I print Jucoole TPU at?
The listing gives none; start with a typical TPU profile and test.
What tolerance does Jucoole list?
±0.03mm on 1.75mm.
Is Jucoole TPU good for watch bands?
Jucoole names watch bands, phone cases and drone parts as uses.
See also
- funtoo transparent orange petg filament review
- ujoy3d hyper pla plus 16 color 250g pack review
- ujoy3d elite pla plus black 4kg review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
