As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

FUNTOO Transparent Orange PETG Filament Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

FUNTOO PETG in transparent orange is a 1kg spool for parts that should glow when light hits them: indicator covers, lamp shades, warning tags, signal lenses and bright tool handles. The listing gives 230-250°C at the nozzle, 70-85°C on the bed and ±0.02mm tolerance. FUNTOO describes impact, wear and chemical resistance in general terms, with no test values, and no print speed. The bullets match another PETG brand's page word for word, so the same factory likely makes both; that does not change how the spool prints.

What stands out

  • Transparent orange tint
  • 230-250°C nozzle, 70-85°C bed
  • ±0.02mm tolerance

Who it fits

Good fit for

Makers who want see-through orange parts such as light covers, signal lenses and high-visibility clips in tough PETG.

Who should skip it

Anyone who needs a speed rating, measured strength or a neutral clear PETG.

Verdict: A bright see-through PETG with usable settings; the rest of the page is generic.

FUNTOO orange PETG specs

1kg transparent orange

Bright tint that passes light.

1.75mm ±0.02mm

Precise diameter.

Nozzle 230-250°C

Standard PETG range.

Bed 70-85°C

Warm bed for grip.

2.8 lb shipping weight

Spool and packaging included.

No speed rating

Start with your PETG profile.

Orange see-through parts

Transparent orange works where you want both visibility and light: LED covers, tail-light style lenses, safety tags and lamp shades. The tint looks strongest in thin walls; thick solid parts look darker. FUNTOO notes low shrinkage, which helps tall single-wall prints stay round.

Print tips for the orange spool

Run near 240°C with a 75°C bed, slow the outer wall, and keep the spool dry so clear walls do not cloud with bubbles. Use glue or a textured plate on PEI. Choose orange for parts that must be seen; choose FUNTOO's transparent blue listing if you want a cool tint instead.

Before you buy

Points to check on the FUNTOO orange PETG.

Check before you buy

  • Your bed reaches 85°C
  • An orange tint suits the part
  • You can keep PETG dry
  • No speed rating is fine

The product at a glance

FUNTOO 1KG PETG Filament

Best for: Orange translucent parts

Material Type
PETG
Filament Diameter
1.75 mm
Net Weight
1KG
Dimensional Accuracy
±0.02 mm
Printing Technology
FDM
Features
High Precision

View on Amazon: FUNTOO 1KG PETG Filament Affiliate link

FUNTOO PETG transparent orange, 1kg 1.75mm ±0.02mm: 230-250°C nozzle, 70-85°C bed; no speed or strength data.

Pros

  • Bright see-through tint
  • Clear temperature window
  • Tight tolerance

Cons

  • No speed rating
  • Generic claims only

Good fit if

  • You print light covers
  • You want high-visibility parts

Skip if

  • You need a neutral clear

Verdict: A good pick for bright translucent parts.

Specifications side by side

Spec FUNTOO 1KG PETG Filament
Material Type PETG
Filament Diameter 1.75 mm
Net Weight 1KG
Dimensional Accuracy ±0.02 mm
Printing Technology FDM
Compatible Material PETG
Features High Precision
Size 1KG
Finish Transparent
Weight 2.8 pounds
Color Transparent Orange

Frequently asked questions

What temperatures does FUNTOO list for PETG?

230-250°C nozzle and 70-85°C heated bed.

Is FUNTOO orange PETG see-through?

Yes, it is a transparent tint; thin walls show it best.

What tolerance does FUNTOO PETG have?

±0.02mm on 1.75mm.

Does FUNTOO give a print speed?

No, the listing has no speed figure.

FUNTOO orange or blue PETG?

Orange suits high-visibility parts and warm light; blue gives a cool tint.

See also