HeyGears PAF10 Resin (White, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
PAF10 is HeyGears' bendable, impact-resistant resin, and this listing is the white 1000g bottle. It is made for HeyGears' own printers: the Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro are all named, so owners of other brands should look elsewhere. The figures are 41% elongation at break, 52 J/m notched impact strength and 1.6% water sorption. In practice that means thin swords, spears and bases on a tabletop miniature can flex instead of snapping, and parts stored for a long time are less likely to crack or flake from moisture. White is the color to choose when a part will be painted or shown bare: HeyGears describes a smooth matte finish without visible layer lines that takes paint well. The grey PAF10 listing quotes 46% elongation rather than 41%, so the white version may be slightly stiffer. No exposure, hardness or tensile figures appear here. Everything below is taken from HeyGears' listing and published specs, without a print test.
What stands out
- White PAF10, 1000g
- 41% elongation at break
- 52 J/m notched impact
- 1.6% water sorption
- HeyGears Reflex printers only
Who it fits
Good fit for
HeyGears Reflex, Reflex RS or Reflex 2 owners who print miniatures or accessories with thin parts that need to survive drops and handling, and who paint them afterward.
Who should skip it
Owners of non-HeyGears printers, and anyone who needs rigid, sharp-edged parts or a clear resin.
Verdict: A tough, slightly bendable white resin for Reflex printers and painted minis.
HeyGears PAF10 white specs
41% elongation
Thin parts bend before they break.
52 J/m notched impact
Joints and edges survive drops better.
1.6% water sorption
Less cracking and flaking in long storage.
Matte white finish
Hides layer lines; ready for primer or paint.
Reflex family only
Reflex, Turbo, RS, RS Turbo, Reflex 2, Reflex 2 Pro.
Where white PAF10 fits the Reflex resin range
HeyGears sells harder standard and model resins for crisp detail, while PAF10 trades some stiffness for bend and impact resistance. The white version is aimed at paint and display, and HeyGears also mentions prototyping fit checks thanks to stable dimensions. If you need a rigid part with sharp edges, a standard Reflex resin is the better choice.
Using PAF10 white on a Reflex 2
HeyGears calls it plug-and-play across its printers, so pick the PAF10 profile in the HeyGears software rather than tuning exposure by hand. Wash and post-cure as HeyGears directs for PAF10. Because the parts flex, supports may need a little more care at removal so thin parts do not bend and set in the wrong shape.
Before buying HeyGears PAF10 white
Checks.
Check before you buy
- Your printer is a HeyGears Reflex, Reflex RS or Reflex 2 model
- Your PAF10 prints need to bend or survive drops
- You will paint or display the white PAF10 parts
The product at a glance
HeyGears 1000g White Resin
Best for: Painted Reflex miniatures
- Net Weight
- 1000g
- Application
- Tabletop miniatures, accessories
- Printing Technology
- Resin
- Color
- White
- Finish
- Matte
- Surface Finish
- Smooth
View on Amazon: HeyGears 1000g White Resin Affiliate link
HeyGears PAF10 resin, white, 1000g: 41% elongation, 52 J/m impact, 1.6% water sorption, matte paint-ready finish; Reflex printers only.
Pros
- Bends instead of snapping
- Matte, paint-ready white
- Low moisture uptake
Cons
- HeyGears printers only
- No exposure or hardness data
- Lower elongation than grey listing
Good fit if
- You paint tabletop minis on a Reflex
Skip if
- You own a non-HeyGears resin printer
Verdict: A drop-resistant white resin for Reflex printers.
Specifications side by side
| Spec | HeyGears 1000g White Resin |
|---|---|
| Net Weight | 1000g |
| Application | Tabletop miniatures, accessories |
| Printing Technology | Resin |
| Color | White |
| Finish | Matte |
| Surface Finish | Smooth |
Frequently asked questions
Which printers can use HeyGears PAF10 white?
Reflex, Reflex Turbo, Reflex RS, Reflex RS Turbo, Reflex 2 and Reflex 2 Pro.
How flexible is white PAF10 resin?
HeyGears lists 41% elongation at break.
Is HeyGears PAF10 white good for painting?
HeyGears describes a matte, paint-ready finish.
Does white PAF10 differ from the grey PAF10?
The grey listing quotes 46% elongation versus 41% for white.
Featured in
See also
- anycubic wash cure max station review
- anycubic photon p1 max white resin printer review
- anycubic wash cure max 3 review
- heygears paf10 flexible resin review
- heygears pap10 miniature resin review
- Heygears Standard Matte Resin 1000g Review: Who It Fits and Who Should Skip It
- HeyGears PARP10 Rapid Prototyping Resin 1000g Review: Who It Fits
- HeyGears PAC10 Wax Casting Resin Review (2026): A Spec-Based Look
- heygears reflex rs resin 3d printer review
- vrmuxita white wardrobe review
