FXAAGFH Dual Color Silk PLA (Gold/Red, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
FXAAGFH Dual Color Silk PLA in gold and red is a 1.75mm silk filament with two colors joined side by side in the strand, so one print shows gold on some faces and red on others without a color change. Gold and red is a classic festive pairing, which points to Lunar New Year decor, Christmas ornaments, trophies and dragon models. FXAAGFH's printing advice is short: use a 0.2mm layer height and keep the filament feeding straight without twisting, which helps the two colors land the way the slicer path places them. Tolerance is ±0.03mm, the surface needs no polishing, and the spool comes in a vacuum bag. There are no nozzle or bed temperatures and no speed figures. The title says 1kg/2.2lbs but the weight field says 14.1 ounces, so check what arrives. We base this review on FXAAGFH's listing and specs.
What stands out
- Dual color silk PLA: gold + red
- 1.75mm, ±0.03mm
- Tip: 0.2mm layers, feed without twisting
- Vacuum bagged
- No temperatures; 1kg title vs 14.1oz weight field
Who it fits
Good fit for
Makers of festive decor, trophies and dragons who want a gold-and-red silk look straight off the printer.
Who should skip it
Anyone who needs printed temperatures, and buyers who want the colors to change along the length instead of side by side.
Verdict: A festive dual-color silk with thin data; test temperatures first and check the spool weight.
FXAAGFH gold and red silk: what is listed
Gold + red
FXAAGFH joins the gold and red halves in a single strand.
±0.03mm
FXAAGFH's diameter tolerance.
0.2mm layers
The one print setting the listing gives.
No twisting
Keep the strand straight so colors stay where intended.
Weight unclear
1kg in the title, 14.1oz in the weight field.
How a gold-red dual silk looks
With two colors side by side, a wall shows whichever half faces outward. On round parts like vases and baubles, gold and red sweep around the surface; on a flat face one color can take over. Rotating the model on the bed changes the split. The silk finish adds shine to both colors, and the gold reads as metallic next to the red.
Printing FXAAGFH dual color silk
Since FXAAGFH gives no temperatures, start from a silk PLA profile and print a small cylinder at 0.2mm layers, as the listing advises. Feed the strand straight from the spool: a twisted path rotates the two halves and mixes the colors unpredictably. Slower outer walls help silk shine.
Before buying FXAAGFH gold and red silk
Checks for this spool.
Check before you buy
- Gold and red together suit your FXAAGFH silk prints
- You can tune FXAAGFH dual silk without listed temperatures
- Your FXAAGFH spool path feeds straight without twist
- You will weigh the FXAAGFH spool on arrival
The product at a glance
FXAAGFH Silk PLA 1.75mm Dual Color
Best for: Festive decor
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/-0.03mm
- Surface Finish
- Silk
- Color Effect
- Dual Color
View on Amazon: FXAAGFH Silk PLA 1.75mm Dual Color Affiliate link
FXAAGFH Dual Color Silk PLA gold/red: coextruded, ±0.03mm, 0.2mm layer tip, no temperatures; title 1kg vs 14.1oz weight field.
Pros
- Festive gold-red pairing
- No polishing needed
- Simple printing tip given
Cons
- No temperatures
- Weight conflict
- ±0.03mm tolerance
Good fit if
- You print gold-red FXAAGFH festive decor
Skip if
- You need full FXAAGFH print settings
Verdict: A festive dual silk with sparse data.
Specifications side by side
| Spec | FXAAGFH Silk PLA 1.75mm Dual Color |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/-0.03mm |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Finish | Silk |
| Color Effect | Dual Color |
| Weight | 14.1 ounces |
| Color | Gold & Red |
Frequently asked questions
How does FXAAGFH gold-red silk show two colors?
The strand is gold on one side and red on the other, so both show on the print at once.
What layer height does FXAAGFH suggest for dual color silk?
0.2mm.
What temperature does FXAAGFH gold-red silk need?
FXAAGFH lists none; start with silk PLA settings.
Is the FXAAGFH gold and red spool really 1kg?
The title says 1kg, but the weight field says 14.1 ounces; the listing does not explain the gap.
What tolerance does FXAAGFH dual silk have?
±0.03mm.
See also
- toksen3d starlight purple chameleon pla review
- elegoo saturn pfa release film 3 pack 273x176 review
- elegoo el 3d 327 12k mono LCD replacement review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- fungdo LCD 3d printer review
- easycargo 30pcs 3d printer heatsink review
