Cregrant3D Skouphy Resin Printer Enclosure Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The carbon box on the exhaust duct is what sets this Skouphy resin tent apart from tents with a bare fan: air passes through activated carbon before it leaves, so it cuts odor even when the duct cannot reach a window. The fan runs up to 4000 RPM. The listing sits under the Cregrant3D brand but is titled Skouphy. Inside you get a soft white LED and a thermo-hygrometer that switches between °F and °C, useful because resin prints poorly in a cold room. The cover is double-layer aluminum foil bonded to Oxford cloth. The spec table gives 17.7 x 17.7 x 23.6 inches. Skouphy lists a long range of printers, from the Photon Mono 2 and Mono 4 to the Saturn 4 Ultra, Mars 4 and Halot-Mage, so measure larger models against that size. Facts come from the listing.
What stands out
- Carbon box on the exhaust duct
- 4000 RPM fan
- LED and °F/°C thermo-hygrometer
Who it fits
Good fit for
Resin printer owners who want odor filtering and a temperature reading in one tent.
Who should skip it
Owners of large-format resin printers that may not fit 17.7 x 17.7 x 23.6 inches.
Verdict: Strong odor control for a mid-size resin printer.
Skouphy resin enclosure specs
4000 RPM fan
Exhaust speed.
Activated carbon box
On the duct.
Thermo-hygrometer
Switches °F/°C.
LED
Soft white light.
17.7 x 17.7 x 23.6 in
Spec table size.
Aluminum foil + Oxford cloth
Double-layer cover.
Carbon on the duct
A fan alone moves fumes; a carbon stage captures part of them. With the carbon box fitted inline, the duct can vent into the room when a window is not practical, though venting outside is still better. The thermo-hygrometer helps catch cold rooms, where resin thickens and supports fail.
Fit and setup
Check your printer's height with the lid open against the 23.6-inch figure, then set the duct and carbon box away from where you work. Choose the Skouphy tent if you want carbon filtering on the exhaust and a temperature readout; choose a double-width tent if your wash and cure station must sit inside too.
Before you order
Checks for the Skouphy resin enclosure.
Check before you buy
- Your printer fits 17.7 x 17.7 x 23.6 in with lid open
- You want carbon filtering on the duct
- You want a temperature readout
- You have a spot for the duct
The product at a glance
Cregrant3D Ventilated Resin Printer Enclosure
Best for: Mid-size resin printers
- Printing Technology
- Resin
- Color
- Black
- Dimensions
- 17.7 × 17.7 × 23.6 inches
- Weight
- 4.41 pounds
View on Amazon: Cregrant3D Ventilated Resin Printer Enclosure Affiliate link
Skouphy resin tent (Cregrant3D listing): 4000 RPM fan, carbon box on the duct, LED, °F/°C thermo-hygrometer.
Pros
- Carbon filtering on exhaust
- Temperature and humidity shown
- LED lighting
Cons
- Mid-size interior
- No interior dimensions
Good fit if
- You own a mid-size resin printer
- You cannot always vent outside
Skip if
- Your curing station must fit too
Verdict: Good odor control for the price.
Specifications side by side
| Spec | Cregrant3D Ventilated Resin Printer Enclosure |
|---|---|
| Printing Technology | Resin |
| Color | Black |
| Dimensions | 17.7 × 17.7 × 23.6 inches |
| Weight | 4.41 pounds |
| Size | Enclosure Black |
Frequently asked questions
Who makes the Skouphy resin enclosure on this listing?
The listing is under Cregrant3D but titled Skouphy.
How fast is the Skouphy exhaust fan?
Up to 4000 RPM.
Does the Skouphy tent filter odor?
Yes, an activated carbon box sits on the exhaust pipe.
Does the Skouphy enclosure show temperature?
Yes, a thermo-hygrometer that switches between Fahrenheit and Celsius.
How big is the Skouphy resin enclosure?
17.7 x 17.7 x 23.6 inches per the spec table.
Featured in
See also
- kalione gt2 6mm timing belt 8 length set review
- intarsio 68 piece 3d printer tool kit review
- intarsio 34 piece 3d printer tool kit review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- anycubic resin 3d printer review
- unxuey 50pcs 3d printer heatsink review
