ELEGOO Mercury XS Bundle Review: Wash, Cure and UV Lamp (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ELEGOO Mercury XS bundle splits post-processing into two machines, a washer and a curing station, and adds a handheld UV curing lamp; that split is the reason to choose it, because one batch can wash while the previous one cures. The washer holds up to 7000ml and takes either the whole build plate (a 180 x 121 x 153mm space) or loose models (201 x 124 x 255mm), and ELEGOO says it suits Saturn and Mars series plates. The curing unit has two L-shaped light strips with 14 UV beads each, 4 more beads in the base strip, a 360° turntable and a maximum curing size of Φ200 x 260mm. The handheld lamp reaches spots the turntable misses or spot-cures resin repairs. Both machines run from one knob: long press for power, turn to set time in 30-second steps, and a UV cover shields your eyes. The page gives no LED wavelength and lists a 3.09 lb weight that looks light for two machines. Our notes rest on ELEGOO's listing alone.
What stands out
- Separate washer and curer run at the same time
- Handheld UV lamp included
- 7000ml wash, up to Φ200 x 260mm cure
- Fits Saturn and Mars build plates
Who it fits
Good fit for
Resin printers with a Saturn or Mars who print back to back and want to wash the next batch while the last one cures.
Who should skip it
Anyone short on bench space, or who prefers a single combined unit with one footprint.
Verdict: A flexible two-machine setup for steady resin output; mind the bench space.
Mercury XS bundle specs
7000ml wash capacity
Enough liquid for a full plate of parts.
Plate-in 180 x 121 x 153mm / loose 201 x 124 x 255mm
Two wash methods with different space.
2 x 14 beads + 4 base beads
Side and bottom light on a 360° turntable.
Φ200 x 260mm cure size
Largest part the curing unit takes.
Knob timer in 30-second steps
One control for both machines.
Why two machines plus a lamp
Combined wash and cure stations make you swap the wash tank for the turntable between steps. With the Mercury XS, the washer and curer each stand on their own, so a print farm or a busy hobbyist can keep both working. The handheld UV lamp adds a third option for touching up support marks, filling gaps with resin or curing inside hollow parts.
A typical Mercury XS cycle
Take the plate straight from the printer and drop it into the washer, or pop the parts off first for the larger loose-model space. Set the time with the knob, then move clean, dry parts to the curing turntable under its UV cover. While they cure, the next plate can wash. Use the handheld lamp on recesses the strips do not reach, and keep it pointed away from your eyes.
Before buying the ELEGOO Mercury XS bundle
Checks.
Check before you buy
- You have room for two Mercury XS machines side by side
- Your printer is a Saturn or Mars for the Mercury XS plate fit
- Your parts fit Φ200 x 260mm in the Mercury XS curer
The product at a glance
ELEGOO Mercury XS Wash and Cure Station
Best for: Parallel wash and cure
- Dimensions
- 12.2 × 12.2 × 20.1 inches
- Weight
- 3.09 pounds
View on Amazon: ELEGOO Mercury XS Wash and Cure Station Affiliate link
ELEGOO Mercury XS bundle: separate 7000ml washer and Φ200x260mm curing unit (2x14 + 4 UV beads), plus a handheld UV lamp; one-knob timers.
Pros
- Wash and cure at the same time
- Handheld lamp for touch-ups
- Two wash methods
Cons
- Two footprints on the bench
- No UV wavelength listed
- Listed weight looks too low
Good fit if
- You print continuous resin batches on a Saturn or Mars
Skip if
- You want one compact unit instead of the two Mercury XS machines
Verdict: The bundle for steady, back-to-back resin batches.
Specifications side by side
| Spec | ELEGOO Mercury XS Wash and Cure Station |
|---|---|
| Dimensions | 12.2 × 12.2 × 20.1 inches |
| Weight | 3.09 pounds |
| Color | Mercury XS Bundle |
| Model | ELEGOO Mercury XS Bundle_MP |
Frequently asked questions
What comes in the ELEGOO Mercury XS bundle?
A washing machine, a curing machine and a handheld UV curing lamp.
How much liquid does the Mercury XS washer hold?
Up to 7000ml.
What is the largest part the Mercury XS can cure?
Φ200 x 260mm on the 360° turntable.
Which printers fit the Mercury XS washer?
ELEGOO lists Saturn and Mars series build plates.
See also
- elegoo mars 5 4k resin 3d printer review
- flashforge adventurer 5m hotend pei plate review
- flashforge ad5x ifs auto refill tpu review
- elegoo centauri carbon 3d printer review
- elegoo 5pcs acf release liner review
- ELEGOO Saturn 3 12K Resin 3D Printer Review (2026): A Spec-Based Look
- ELEGOO Mars 4 Ultra 9K Review: Specs, Pros and Cons
- ELEGOO Mercury Plus 2.0 Wash and Cure Station Review: Who It Fits and Who Should Skip It
- anycubic photon p1 wash cure review
- owc mercury helios fx review
