ELEGOO Mars 5 (6.6-Inch 4K) Resin 3D Printer Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ELEGOO Mars 5 is the 4K, non-Ultra member of ELEGOO's Mars line, and it suits a buyer who wants a basic, low-cost resin printer for small models: a 6.6-inch 4K LCD screen, auto-leveling through a smart mechanical sensor, and overheat protection. The listing gives a printing size of 5.91 x 5.65 x 3.53 inches without saying which figure is the height. That is the extent of the published detail. The product page has a single bullet that just reads "ELEGOO LCD 3D PRINTER" and a title that starts with a placeholder word, so it gives no XY pixel size, light source, print speed, release film type or connectivity. Compared with the 7-inch 9K Mars 5 Ultra, which adds tilt release, an AI camera and Wi-Fi, this is the simpler machine. If you buy it, check ELEGOO's own spec sheet for the details this page skips. We relied on this listing only.
What stands out
- 6.6-inch 4K LCD
- Auto-leveling via smart mechanical sensor
- Overheat protection
- 5.91 x 5.65 x 3.53in print size
Who it fits
Good fit for
First-time resin printer buyers who want a small, simple ELEGOO machine for miniatures and are happy to look up the remaining specs on ELEGOO's site.
Who should skip it
Anyone comparing pixel size, speed or Wi-Fi on paper, since this listing gives none of them; the Mars 5 Ultra listing is far more complete.
Verdict: A basic 4K Mars with auto-leveling; the thin listing means you should confirm the details before buying.
ELEGOO Mars 5 (4K) listed specs
6.6-inch 4K LCD
The screen that sets detail and plate size.
Auto-leveling
Done by a smart mechanical sensor rather than by hand.
Overheat protection
A safety cut-out listed in the title.
5.91 x 5.65 x 3.53in
Printing size; the axis order is not stated.
14.6 lb shipping weight
From the listing's spec fields.
What the short listing leaves out
Resin printers are usually compared on XY resolution, light uniformity, release film and connectivity. This Mars 5 page lists none of these, and its only bullet repeats the product type. Treat it as ELEGOO's entry 4K model and read the manufacturer's full spec sheet for those numbers before you compare it with a 9K or 10K printer.
Setting up a Mars 5
Auto-leveling with the mechanical sensor removes the paper-test step common on older resin printers. Place it in a ventilated room, wear gloves when pouring resin, and plan for a wash and cure step after each print. Small miniatures and jewelry-size parts fit the build space comfortably.
Before buying the ELEGOO Mars 5 4K
Checks.
Check before you buy
- You have checked ELEGOO's spec sheet for the Mars 5 pixel size
- Your models fit the 5.91 x 5.65 x 3.53in Mars 5 build space
- You do not need Wi-Fi or an AI camera on the Mars 5
The product at a glance
ELEGOO Mars 5 4K Resin Printer
Best for: Entry-level small resin prints
- Build Volume
- 5.91 × 5.65 × 3.53 Inches
- Printing Technology
- LCD
- Leveling Type
- Auto-Leveling
- Resolution
- 4K
- Dimensions
- 9.06 × 9.06 × 17.1 inches
- Weight
- 14.6 pounds
View on Amazon: ELEGOO Mars 5 4K Resin Printer Affiliate link
ELEGOO Mars 5: 6.6-inch 4K LCD, auto-leveling via mechanical sensor, overheat protection, 5.91 x 5.65 x 3.53in print size; very short listing.
Pros
- Auto-leveling
- Simple entry-level Mars
- Overheat protection
Cons
- Listing gives almost no specs
- No pixel size or speed stated
- No Wi-Fi listed
Good fit if
- You want a basic small resin printer from ELEGOO
Skip if
- You need full specs on the page before buying the Mars 5
Verdict: A basic Mars for small prints; confirm specs first.
Specifications side by side
| Spec | ELEGOO Mars 5 4K Resin Printer |
|---|---|
| Build Volume | 5.91 × 5.65 × 3.53 Inches |
| Printing Technology | LCD |
| Leveling Type | Auto-Leveling |
| Leveling | Auto Leveling |
| Resolution | 4K |
| Dimensions | 9.06 × 9.06 × 17.1 inches |
| Weight | 14.6 pounds |
| Size | Mars 5 |
| Color | Mars 5 |
| Model | Mars 5 |
Frequently asked questions
What screen does the ELEGOO Mars 5 use?
A 6.6-inch 4K LCD, according to the listing title.
Does the ELEGOO Mars 5 level itself?
Yes, the listing says it has auto-leveling with a smart mechanical sensor.
What is the Mars 5 print size?
The listing gives 5.91 x 5.65 x 3.53 inches.
How is the Mars 5 different from the Mars 5 Ultra?
The Mars 5 Ultra listings add a 7-inch 9K screen, tilt release, an AI camera and Wi-Fi; this Mars 5 listing has a 6.6-inch 4K screen and lists none of those.
See also
- flashforge adventurer 5m hotend pei plate review
- flashforge ad5x ifs auto refill tpu review
- flashforge ad5x 4x10g hs pla bundle review
- elegoo centauri carbon 3d printer review
- elegoo 5pcs acf release liner review
- ELEGOO Saturn 3 12K Resin 3D Printer Review (2026): A Spec-Based Look
- ELEGOO Mars 4 Ultra 9K Review: Specs, Pros and Cons
- ELEGOO Mercury Plus 2.0 Wash and Cure Station Review: Who It Fits and Who Should Skip It
- elegoo mars 5 ultra resin 3d printer review
- amerlife 8x13 5 resin shed review
