As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality CR Touch Auto Leveling Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The CR Touch is Creality's bed probe: it taps a grid of points on the bed, works out the tilt between nozzle and plate, and compensates during printing so first layers stick even on an uneven surface. This official kit comes with three mounting brackets and lists the Ender 3, 3 V2, 3 Pro, 3 Max, Ender 3S, Ender 5, 5 Pro, 5S and CR-10. The catch is the board: the title names 32-bit V4.2.2 and V4.2.7 mainboards, and setup means loading CR Touch firmware for your board version from Creality's site via the SD card. The probe pin is metal, rated by Creality for more than 100,000 uses, and it works on PEI, sticker, glass and metal beds. The kit facts come from the official Creality listing.

What stands out

  • Metal probe pin, 100,000+ uses
  • Three mounting brackets
  • CR Touch reads PEI, glass, sticker and metal beds

Who it fits

Good fit for

Owners of Ender 3, Ender 5 or CR-10 printers with a 32-bit V4.2.2 or V4.2.7 board who are tired of leveling by hand.

Who should skip it

Owners of 8-bit boards who do not want to change boards, and printers that already have a built-in probe.

Verdict: A reliable official probe, provided the board version matches.

Creality CR Touch kit specs

Metal probe pin

Rated for 100,000+ uses.

3 mounting brackets

For different print heads.

32-bit V4.2.2 / V4.2.7

Boards named in the title.

Firmware via SD card

Match your board version.

PEI / glass / sticker / metal beds

All supported.

What the probe corrects

A probe does not flatten a warped bed; it measures it. The CR Touch records the height at each point and the firmware raises or lowers the nozzle as it travels, so a slightly bowed glass plate or a heated bed that dips in the middle still gets an even first layer. Because the probe touches the surface, it works on any bed material, unlike inductive sensors that need metal.

Installing the CR Touch

Pick the bracket that suits your print head, plug the probe into the board, then download the CR Touch firmware for your exact mainboard version, copy it to the SD card and power on to flash. Set the Z offset afterwards. Choose this kit if you have a matching 32-bit board; if your Ender still runs an 8-bit board, budget for a board upgrade too.

Before you order

Checks for the official Creality CR Touch kit.

Check before you buy

  • Your board is a 32-bit V4.2.2 or V4.2.7
  • Your printer is in Creality's CR Touch fit list
  • You can flash CR Touch firmware from the SD card
  • You will set a new Z offset

The product at a glance

Creality CR Touch Auto Leveling Kit

Best for: 32-bit Ender 3 and CR-10 boards

Leveling
Auto Leveling
Dimensions
1.06 × 1.55 × 0.69 inches

View on Amazon: Creality CR Touch Auto Leveling Kit Affiliate link

Official Creality CR Touch: metal probe pin rated 100,000+ uses, three brackets, for 32-bit V4.2.2/V4.2.7 boards on Ender 3, Ender 5 and CR-10.

Pros

  • Touch probe works on any bed
  • Metal pin for long life
  • Three brackets included

Cons

  • Needs a matching 32-bit board
  • Firmware flash required

Good fit if

  • You have a V4.2.2 or V4.2.7 board
  • You want automatic bed compensation

Skip if

  • Your printer still has an 8-bit board

Verdict: The official probe for 32-bit Creality boards.

Specifications side by side

Spec Creality CR Touch Auto Leveling Kit
Leveling Auto Leveling
Dimensions 1.06 × 1.55 × 0.69 inches
Size CR Touch Kit
Color CR Touch Kit

Frequently asked questions

Which boards does the official CR Touch support?

The title names Creality's 32-bit V4.2.2 and V4.2.7 mainboards.

How many brackets come with the Creality CR Touch kit?

Three.

Does the CR Touch work on a glass bed?

Yes, Creality lists PEI, sticker, glass and metal beds.

How long does the CR Touch probe last?

Creality rates the metal pin for more than 100,000 uses.

Do I need new firmware for the CR Touch?

Yes, download the CR Touch firmware for your board version and flash it from the SD card.

See also