As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best Matte Build Plates for 3D Printers: 5 Spec-Based Picks

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

A matte build plate gives prints a frosted, non-reflective underside and usually grips better than a glossy one. Our top pick is the BIQU CryoGrip Pro Frostbite in matte orange for Bambu Lab printers: seven layers, PLA at 30-50℃ without glue, and an AR code the printer reads. The cheapest pick is Creality's double-sided matte PEI plate for the Creality Hi. In between are UniTak3D's matte-and-glossy cold plate, official matte PEI for the K1 Max, and a 310x315mm matte epoxy plate for Creality's large beds. All 5 were selected from published listings.

Our top pick: BIQU Cryogrip Pro Frostbite Matte Build Plate.

Quick picks

#ProductBest forPrice
1 BIQU Cryogrip Pro Frostbite Matte Build Plate Best overall Best overall Check price of BIQU Cryogrip Pro Frostbite Matte Build Plate on Amazon
2 UniTak3D 257x257mm Double-Sided Cold Plate Best two-sided Best two-sided Check price of UniTak3D 257x257mm Double-Sided Cold Plate on Amazon
3 Comgrow K1 Max Matte PEI Build Plate Best for K1 Max Best for K1 Max Check price of Comgrow K1 Max Matte PEI Build Plate on Amazon
4 Creality 310x315mm Matte Epoxy Resin Build Plate Best epoxy Best epoxy Check price of Creality 310x315mm Matte Epoxy Resin Build Plate on Amazon
5 Comgrow Creality Hi Matte PEI Build Plate Best budget Best budget Check price of Comgrow Creality Hi Matte PEI Build Plate on Amazon

The best fit for you

Our 5 picks

Best overall

BIQU Cryogrip Pro Frostbite Matte Build Plate

Best for: Best overall

Finish
✓ Matte
Dimensions
257x257MM
Build Surface Type
Matte

View on Amazon: BIQU Cryogrip Pro Frostbite Matte Build Plate Affiliate link

BIQU CryoGrip Pro Frostbite cold plate with a matte orange coating for Bambu Lab A1, P1P, P1S, P2S, X1C, X1E and X2D (257x257mm): 7 layers, PLA at 30-50℃ and PETG at 50-70℃ without glue, an AR code for the printer, and soap-and-water cleaning.

Pros

  • Glue-free PLA near room temperature
  • AR code for Bambu
  • Soap and water restores grip

Cons

  • Costliest pick here
  • Bambu 257mm only

Good fit if

  • You print large PLA parts that warp on a P1S
  • You want to cut bed heat

Skip if

  • You print ABS or ASA

Verdict: The matte cold plate for Bambu printers.

Best two-sided

UniTak3D 257x257mm Double-Sided Cold Plate

Best for: Best two-sided

Finish
✓ Matte
Dimensions
257x257mm
Build Surface Type
Glossy, matte

View on Amazon: UniTak3D 257x257mm Double-Sided Cold Plate Affiliate link

UniTak3D 257x257mm cold plate for Bambu Lab A1, P1P, P1S, P2S, X1, X1C, X1E and X2D: a matte side for PLA at 30-50°C and a glossy side for more filament types, glue-free, released by bending once cool.

Pros

  • Matte and glossy faces
  • Low bed temperatures
  • Fits every 257mm Bambu

Cons

  • Re-level after flipping
  • No harsh cleaners

Good fit if

  • You switch between matte and glossy PLA bottoms on an A1
  • You want less bed heat

Skip if

  • You only need one finish

Verdict: A matte and a glossy cold surface in one plate.

Best for K1 Max

Comgrow K1 Max Matte PEI Build Plate

Best for: Best for K1 Max

Finish
✓ Matte
Primary Material
Spring steel
Build Surface Type
Matte PEI, textured PEI
Build Plate Material
PEI, Spring Steel
Dimensions
7 × 7 × 0.7 inches

View on Amazon: Comgrow K1 Max Matte PEI Build Plate Affiliate link

Official Creality K1 Max matte PEI kit (315x310mm, sold by Comgrow): black frosted textured PEI on spring steel with 2 locating holes so the plate sits square on the bed.

Pros

  • Official K1 Max part
  • Locating holes
  • Frosted PEI resists scratches

Cons

  • Single side
  • Spec size lists the Ender 3 V3 Plus

Good fit if

  • Your K1 Max plate is scratched
  • You print warping PETG on a K1 Max

Skip if

  • You own a K1C

Verdict: Matte PEI for Creality's large CoreXY.

Best epoxy

Creality 310x315mm Matte Epoxy Resin Build Plate

Best for: Best epoxy

Finish
✓ Matte
Primary Material
Spring steel
Dimensions
310 * 315mm
Build Surface Type
Textured epoxy resin

View on Amazon: Creality 310x315mm Matte Epoxy Resin Build Plate Affiliate link

Creality 310x315mm double-sided epoxy plate in matte black: a sandblasted epoxy texture for adhesion at high and low temperatures, for K1 Max, Ender 3 S1 Plus, Ender 3 V3 Plus and K2 Pro, with materials up to PA-CF and PC; sheet only, no magnet.

Pros

  • Two matte epoxy faces
  • Wide material list
  • Official Creality part

Cons

  • No magnetic base

Good fit if

  • You print PA-CF on a K2 Pro
  • You want a second large textured surface

Skip if

  • You need a magnet too

Verdict: A matte epoxy plate for large Creality beds.

Best budget

Comgrow Creality Hi Matte PEI Build Plate

Best for: Best budget

Finish
✓ Matte
Dimensions
280*265mm
Build Surface Type
Textured PEI
Build Plate Material
PEI, Spring Steel

View on Amazon: Comgrow Creality Hi Matte PEI Build Plate Affiliate link

Read our full review

Official Creality Hi matte PEI kit (280x265mm, sold by Comgrow): double-sided black frosted PEI on spring steel for the Creality Hi, so a worn side can be flipped.

Pros

  • Cheapest pick here
  • Two matte PEI sides

Cons

  • Creality Hi only
  • Low stock

Good fit if

  • You own a Creality Hi and print daily
  • You want a spare matte surface

Skip if

  • You own another printer

Verdict: A cheap double-matte plate for the Creality Hi.

Specifications side by side

Spec BIQU Cryogrip Pro Frostbite Matte Build Plate UniTak3D 257x257mm Double-Sided Cold Plate Comgrow K1 Max Matte PEI Build Plate Creality 310x315mm Matte Epoxy Resin Build Plate Comgrow Creality Hi Matte PEI Build Plate
Primary Material not stated not stated Spring steel Spring steel not stated
Dimensions 257x257MM 257x257mm not stated 310 * 315mm 280*265mm
Build Surface Type Matte Glossy, matte Matte PEI, textured PEI Textured epoxy resin Textured PEI
Printing Technology not stated not stated not stated Resin not stated
Finish Matte Matte Matte Matte Matte
Build Plate Material not stated not stated PEI, Spring Steel Spring Steel PEI, Spring Steel
Build Plate Size 257x257mm 257x257mm not stated not stated not stated
Size P1/P2/X1/A1/X2D for Bambu Lab A1/P2S/P1S/P1P/X1C/X1/X1E/X2D 315*310 For Ender 3 V3 Plus K1 Max/Ender 3 V3 Plus/K2 Pro 280*265mm
Color Frostbite-Orange Glossy&Matte cold plate-green not stated Epoxy Resin Matte Black-1 not stated
Model not stated Uni114A1C not stated not stated not stated

How to choose a matte build plate

  1. Lower the bed for cold plates

    BIQU and UniTak3D both list PLA at 30-50℃; set the slicer's cool plate profile.

  2. Clean gently

    BIQU says water and soap restore adhesion; UniTak3D warns against harsh cleaning of its cold plate.

  3. Check the magnet

    Creality's epoxy plate is the sheet only; your printer needs its magnetic base.

  4. Flip when worn

    The Creality Hi and epoxy plates are matte on both sides.

Frequently asked questions

What bed temperature does the BIQU Frostbite need for PETG?

BIQU lists 50-70℃ for PETG and 30-50℃ for PLA.

Does the UniTak3D cold plate have a glossy side?

Yes, one side is matte and the other glossy.

Is the Creality K1 Max matte PEI plate official?

Yes, it is sold as an official Creality kit.

What can print on the Creality matte epoxy plate?

Creality lists ABS, PLA, PETG, PET, TPU, PA, ASA, PC and CF blends.

Is the Creality Hi matte plate double-sided?

Yes, both sides have black frosted PEI.

See also