As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Anrigeail 3D Printer Stand with Filament Storage Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Unlike most printer stands, Anrigeail prints its size: 39.4 inches long, 24 inches deep and 28 inches high, weighing 42 lb. That is a desk-height top wide enough for most bed-slingers and many enclosed CoreXY machines, plus a filament shelf. The frame is heavy-duty steel with X-shaped bracing, three tiers, a tool drawer and two storage compartments. A built-in power strip gives 2 AC outlets and 2 USB ports, enough for a printer, a lamp and a phone charger. Anrigeail adds marketing figures (30% faster prep, up to 40% less wobble) that are claims rather than measured specs, and it gives no load rating for the top. For a heavy printer, the X-bracket frame is a better sign than a wooden cart. Data comes from Anrigeail's page; we have not used the stand.

What stands out

  • 39.4 x 24 x 28 in, 42 lb
  • Steel frame with X-bracket
  • 2 AC outlets + 2 USB ports

Who it fits

Good fit for

Owners of mid-size or large FDM printers who want a dedicated table with power and storage.

Who should skip it

Buyers who need a stated weight capacity or a taller standing-height surface.

Verdict: A well-specified printer table; load rating is the missing number.

Anrigeail stand specs

39.4 x 24 x 28 in

L x D x H.

42 lb

Listed weight.

Steel, X-bracket

Resists sway.

3 tiers + drawer

Spools, tools, parts.

2 AC + 2 USB

Built-in power strip.

Load rating

Not stated.

Steel frame and bracing

Fast printers push the bed or toolhead hard, and a stand that sways turns that into ringing on prints. Cross bracing in an X stops the frame racking side to side. At 42 lb the stand is heavy enough to stay put under a mid-size printer, but check the floor is level before placing it.

Power and storage

Plug the printer into the strip and keep the cable run short, and use the USB ports for a light or a camera. Spools on the lower tier keep the weight low. Choose the Anrigeail stand if you want stated size, steel bracing and built-in outlets; choose the GUULIBERA stand if you prefer a wood finish with four filament tiers and can confirm its size.

Before you order

Checks for the Anrigeail stand.

Check before you buy

  • Your printer fits a 39.4 x 24 in top
  • You are fine with a 28 in Anrigeail top height
  • You want built-in AC and USB power
  • You can ask the seller about load if your printer is heavy

The product at a glance

Anrigeail 39.4-Inch 3D Printer Stand with Power Hub

Best for: Mid-size and large printers

Dimensions
24 × 39.4 × 28 inches
Weight
42 pounds

View on Amazon: Anrigeail 39.4-Inch 3D Printer Stand with Power Hub Affiliate link

Anrigeail steel printer table, 39.4 x 24 x 28 in, X-bracket frame, 3 tiers, drawer, 2 AC + 2 USB power strip.

Pros

  • Stated dimensions
  • X-bracket steel frame
  • Built-in AC and USB

Cons

  • No load rating
  • Marketing percentages

Good fit if

  • You own a mid-size or large printer
  • You want power at the stand

Skip if

  • You need a standing-height table

Verdict: The better-documented stand of the two.

Specifications side by side

Spec Anrigeail 39.4-Inch 3D Printer Stand with Power Hub
Dimensions 24 × 39.4 × 28 inches
Weight 42 pounds
Size 39.4" x 24" x 28" H
Color Brown
Model 3D Printer Rack Filaments Storage

Frequently asked questions

How big is the Anrigeail printer stand?

39.4 x 24 x 28 inches (L x D x H).

How many outlets does the Anrigeail stand have?

2 AC outlets and 2 USB ports.

What is the Anrigeail stand made of?

A heavy-duty steel frame with X-bracket reinforcement.

How much does the Anrigeail stand weigh?

42 pounds.

What weight can the Anrigeail top hold?

Anrigeail does not give a load rating.

See also