SUNLU Water Washable Resin 1kg Black Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU Water Washable Resin in black is a 1kg bottle of standard-type photopolymer that you rinse in tap water instead of isopropyl alcohol, which is the reason most buyers pick it: no IPA to buy, store or dispose of. It cures at 395-405nm and SUNLU lists it for 2K, 4K and 8K LCD, DLP and SLA resin printers. Black gives parts a finished look straight off the plate, good for display pieces, enclosures and props, though fine surface detail is harder to judge than on grey. SUNLU claims low shrinkage and a light smell, but gives no exposure times, hardness or tensile figures, and one bullet also mentions IPA or ethanol cleaning. All points come from SUNLU's listing.
What stands out
- Rinses in water, no IPA needed
- 395-405nm for LCD, DLP and SLA
- Black for a finished-looking part
Who it fits
Good fit for
Resin printer owners who want to drop IPA from their workflow, especially in apartments or shared spaces, and who print display models, props or cases in a single dark color.
Who should skip it
Anyone who needs tough or flexible parts, published exposure settings or mechanical data, and painters who want a grey base that shows detail.
Verdict: An easy-cleanup standard resin for everyday prints; dial in exposure yourself and keep it out of the drain.
SUNLU Water Washable black resin specs
Water washable
Rinse prints in water; one bullet also allows IPA or ethanol.
395-405nm cure
Matches the light source of nearly all consumer resin printers.
2K/4K/8K LCD, DLP, SLA
Broad printer support; no printer-specific profiles given.
Low shrinkage (claimed)
Helps fit and fine detail; no figure is given.
Black, 1kg bottle
Finished dark look; detail is harder to inspect than on grey.
Leak-proof bottle
SUNLU cites a patented bottle design for shipping.
Bottle and resin
The resin ships in a 1kg leak-proof bottle (2.21 pounds packed). SUNLU describes a light odor that fades after printing. Store it sealed and out of sunlight, since daylight carries enough UV to cure it in the bottle.
Printing and washing
With no exposure times in the listing, run a calibration print such as a validation matrix on your printer before a real job. Rinse prints in water, then cure them under UV. Resin-laden wash water is still hazardous: let it cure in sunlight and filter out the solids before disposal rather than pouring it down the sink. Wear gloves when handling uncured resin.
Before you buy
Water washable black resin checklist.
Check before you buy
- Your printer cures at 395-405nm
- You can run your own exposure calibration
- You will cure and filter SUNLU rinse water before disposal
- You want a black, not grey, finish
The product at a glance
SUNLU Water Washable Resin 1kg
Best for: IPA-free cleanup
- Printing Technology
- Resin
- Features
- High Precision, Low Shrinkage, Fast Curing
- Resin Type
- Water Washable
- Curing Wavelength
- 405nm
- Weight
- 2.21 pounds
View on Amazon: SUNLU Water Washable Resin 1kg Affiliate link
SUNLU Water Washable Resin, black, 1kg: 395-405nm, rinses in water, for 2K/4K/8K LCD/DLP/SLA printers, low shrinkage and light odor claimed; no exposure, hardness or strength data.
Pros
- No IPA needed
- Light smell
- Finished black look
Cons
- No exposure settings listed
- Rinse water still needs safe disposal
Good fit if
- You want to skip IPA
- You print display pieces in black
Skip if
- You need tough engineering resin
Verdict: An easy-cleanup black standard resin for everyday prints.
Specifications side by side
| Spec | SUNLU Water Washable Resin 1kg |
|---|---|
| Printing Technology | Resin |
| Features | High Precision, Low Shrinkage, Fast Curing |
| Resin Type | Water Washable |
| Curing Wavelength | 405nm |
| Weight | 2.21 pounds |
| Size | M-1000g |
| Color | 1kg Black |
| Model | Water Washable 3D Printer Resin |
Frequently asked questions
Can you wash SUNLU Water Washable resin with water only?
Yes, that is its main feature; one bullet also mentions IPA or ethanol as an option.
Which printers does SUNLU Water Washable resin fit?
SUNLU lists 2K, 4K and 8K LCD, DLP and SLA printers that cure at 395-405nm.
Does SUNLU list exposure settings for this resin?
No. Run a calibration print to find exposure times for your printer.
Can water-washable rinse water go down the drain?
No. It still contains uncured resin; cure it and filter out the solids first.
Black or grey water-washable resin?
Choose black for display pieces and parts that should look finished; choose grey if you paint models and want to see detail clearly.
Featured in
See also
- gizmo dorks flexible tpu filament 3d printers review
- sainsmart 1 75mm black epa cf carbon review
- anycubic high speed pla filament review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- fungdo LCD 3d printer review
- easycargo 30pcs 3d printer heatsink review
