As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HeyGears Pulsing Release Module and Heated Tank Kit Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This HeyGears kit pairs the Pulsing Release Module (PRM) with the Heated & Pulsing Release Resin Tank, the two parts the system needs, for the Reflex RS Turbo and Reflex RS. Our top reason to buy the kit rather than the module alone is simple: the PRM cannot work without the pulsing tank, and here both arrive together. The module inflates and deflates the release film in cycles, which HeyGears says cuts peel force by about 50% per layer. That lower force is claimed to allow up to 25% fewer supports and up to 20% faster printing with some resins (the speed figure comes from PAU10). It is required for HeyGears' PAC10, PAE10 and PAU20 resins. We compared the listing and published specs, not a kit we used.

What stands out

  • Module and heated pulsing tank together
  • About 50% lower peel force per layer
  • Unlocks PAC10, PAE10 and PAU20 resins

Who it fits

Good fit for

Reflex RS and RS Turbo owners who want HeyGears' engineering or casting resins, or fewer supports on solid parts, and do not yet own a pulsing tank.

Who should skip it

Owners of other printers, anyone printing mostly thin-walled models of 3mm or less, and users who rely on PAWW10 or PAWW20 water-washable resin.

Verdict: The complete pulsing setup for a Reflex RS or RS Turbo; worth it if you need PAC10/PAE10/PAU20 or print solid parts.

PRM kit: pros and cons

Module plus heated pulsing tank

Pro: nothing else to buy before the system works.

About 50% less peel force

Pro: less stress on parts during each lift.

Up to 25% fewer supports

Pro: cleaner surfaces and less resin spent on supports.

Up to 20% faster with some resins

Pro: the listing ties this to PAU10 data, so results vary by resin.

Not for walls of 3mm or less

Con: delicate thin-wall models are not recommended.

No PAWW10/PAWW20 support

Con: water-washable HeyGears resins cannot use it.

What is in the kit

The grey kit holds the Pulsing Release Module and a Heated & Pulsing Release Resin Tank. The title names the Reflex RS Turbo and Reflex RS as the printers it fits. The listing gives no weight, dimensions or install steps.

Using it day to day

Fit the module and heated tank to the Reflex RS or RS Turbo, then print as usual; the film pulses between layers to ease separation. Use it for solid parts, functional resins and castables. Switch back to a standard tank for thin-walled pieces under 3mm or for PAWW10 and PAWW20 water-washable resins, which the module does not support.

Before you buy

PRM kit checklist.

Check before you buy

  • You own a Reflex RS or RS Turbo
  • You print PAC10, PAE10 or PAU20, or solid parts
  • You keep a standard tank for thin walls
  • You do not rely on PAWW water-washable resin with the PRM

The product at a glance

HeyGears Reflex Pulsing Release Module and Tank Kit

Best for: Reflex RS and RS Turbo owners

Printing Technology
Resin
Color
Grey

View on Amazon: HeyGears Reflex Pulsing Release Module and Tank Kit Affiliate link

HeyGears Pulsing Release Module with Heated & Pulsing Release Resin Tank for Reflex RS and RS Turbo: about 50% less peel force, up to 25% fewer supports, required for PAC10/PAE10/PAU20; not for PAWW resins or walls of 3mm or less.

Pros

  • Complete pulsing setup in one box
  • Lower peel force
  • Enables engineering and casting resins

Cons

  • Not for thin walls of 3mm or less
  • No PAWW10/PAWW20 support

Good fit if

  • You own a Reflex RS or RS Turbo
  • You print PAC10, PAE10 or PAU20

Skip if

  • You only print thin-walled minis

Verdict: The full pulsing upgrade for Reflex RS-series printers.

Specifications side by side

Spec HeyGears Reflex Pulsing Release Module and Tank Kit
Printing Technology Resin
Color Grey

Frequently asked questions

Which printers does the HeyGears PRM kit fit?

The Reflex RS Turbo and Reflex RS, per the listing title.

Why buy the PRM kit instead of the module alone?

The module needs a pulsing release tank to work; this kit includes the heated pulsing tank.

Which HeyGears resins need the pulsing module?

PAC10, PAE10 and PAU20 require it.

Which resins do not work with the pulsing module?

PAWW10 and PAWW20 water-washable resins.

Does the PRM kit suit thin-walled models?

No. HeyGears does not recommend it for walls of 3mm or thinner.

See also