FLASHFORGE Adventurer 5M Review: Add a Printable Enclosure (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
FLASHFORGE does something unusual on this Adventurer 5M listing: it offers a free enclosure design you print on the machine itself. That changes who the printer suits. Out of the box it is an unenclosed 220×220×220mm CoreXY printer, best with PLA and PETG. Print the enclosure parts and FLASHFORGE says the warmer, steadier chamber lets it handle ABS, ASA and nylon-CF with less warping and cracking. The page does not list panel material, hardware or print time for that kit, so budget a weekend and some extra filament. The base hardware is the familiar AD5M package: a 50W hot end that hits 200°C in 35 seconds, a 280°C direct drive, 32mm³/s flow, 600mm/s top speed with 20,000mm/s² acceleration, one-click auto leveling, vibration compensation and tool-free nozzle swaps in about 3 seconds. Filament runout detection and power-loss resume protect long jobs. FLASHFORGE's listing is the only source for these details.
What stands out
- Free printable enclosure kit for ABS/ASA/nylon-CF
- 280°C direct drive, 50W hot end
- Runout detection and power-loss resume
- 4.3-inch touchscreen
Who it fits
Good fit for
Tinkerers who want to start on PLA and later move to ABS, ASA or nylon-CF by printing their own enclosure.
Who should skip it
Buyers who want ABS-ready hardware on day one with no DIY step.
Verdict: A fast, easy printer with a sensible upgrade path to warmer materials, if you are happy to build the enclosure yourself.
Adventurer 5M specs that matter for the enclosure upgrade
280°C direct drive
Hot enough for ABS and ASA once the chamber stays warm.
50W hot end, 200°C in 35s
Short waits between jobs.
Free printable enclosure kit
Traps heat to cut warping; parts and hardware not detailed.
Runout detection + power-loss resume
Long ABS prints survive a spool end or outage.
20 lb, 14.8×14.3×16.3 in
Measure around it before printing a box for it.
No enclosure yet, but a plan
The all-metal CoreXY frame and vibration compensation are what make 600mm/s usable. Running without a box keeps PLA cool and crisp, while the printable enclosure is FLASHFORGE's answer for materials that crack in drafts. The quick-swap nozzle also helps the upgrade: you can keep one nozzle for PLA and another for fiber blends.
From PLA to ABS on one machine
Start with PLA and PETG to learn the printer; FLASHFORGE says setup takes about 10 minutes from the box. Print the enclosure parts in PETG or another heat-tolerant filament before running ABS. Once enclosed, vent the room when printing ABS or ASA.
Before buying the Adventurer 5M for ABS later
Questions for this FLASHFORGE listing.
Check before you buy
- You are willing to print the Adventurer 5M enclosure parts yourself
- You can vent the room for Adventurer 5M ABS jobs
- Your Adventurer 5M parts fit within 220mm
The product at a glance
Flashforge Adventurer Direct Drive 3D Printer
Best for: PLA now, ABS and ASA later
- Build Volume
- 220×220×220mm
- Print Speed
- 600mm/s
- Leveling Type
- Auto Bed Leveling
- Motion Structure
- CoreXY
- Extruder Type
- Direct Drive
- Target Audience
- Beginners, Kids
View on Amazon: Flashforge Adventurer Direct Drive 3D Printer Affiliate link
Adventurer 5M with a free print-it-yourself enclosure path: 280°C direct drive, 50W hot end, runout and power-loss protection on a 220mm CoreXY frame.
Pros
- Printable enclosure opens up ABS/ASA
- Quick 35s heat-up
- Runout and outage protection
Cons
- Enclosure is DIY, details not listed
- No enclosure until you build it
- 220mm build cube
Good fit if
- You enjoy upgrading your own printer
Skip if
- You need an enclosed printer out of the box
Verdict: An unenclosed AD5M with an easy route to warmer materials.
Specifications side by side
| Spec | Flashforge Adventurer Direct Drive 3D Printer |
|---|---|
| Build Volume | 220×220×220mm |
| Print Speed | 600mm/s |
| Leveling Type | Auto Bed Leveling |
| Motion Structure | CoreXY |
| Extruder Type | Direct Drive |
| Leveling | Auto Leveling |
| Target Audience | Beginners, Kids |
| Dimensions | 14.8 × 14.3 × 16.3 inches |
| Weight | 20 pounds |
| Color | AD5M |
Frequently asked questions
Can the Adventurer 5M print ABS?
With the printable enclosure kit, FLASHFORGE says it can handle ABS, ASA and nylon-CF.
Is the Adventurer 5M enclosure kit included?
It is a free design you print; panels and hardware are not detailed on the page.
How hot does the Adventurer 5M nozzle get?
The direct drive is rated to 280°C.
Does the Adventurer 5M resume after a power cut?
Yes, power-loss recovery is listed.
See also
- flashforge adventurer 5m pro filtration upgrade review
- creality k2 pro combo large parts review
- creality k1 max batch printing review
- flashforge adventurer 5m 3d printer review
- flashforge creator 5 pro 4 toolhead 3d printer review
- FLASHFORGE Adventurer 5M Pro Enclosed 3D Printer Review: Specs, Pros and Cons
- FLASHFORGE Creator 5 Multi-Toolhead 3D Printer Review: Specs, Pros and Cons
- FLASHFORGE Creator 5 4-Toolhead 3D Printer Review (2026): A Spec-Based Look
- flashforge adventurer direct drive 3d printer review
- elite avanti direct drive smart review
