ELEGOO Centauri 2 Combo Review (2026): 4-Color CoreXY Printer
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ELEGOO Centauri 2 Combo is a CoreXY printer sold with ELEGOO's CANVAS 4-color system, aimed at beginners who want multicolor prints without building a setup by hand. That focus on easy color is the reason to pick it: each of the four slots has its own motor, spools with RFID tags are recognized automatically, and auto refill switches to another spool when one runs out. The printer itself reaches 500mm/s with 20,000mm/s² acceleration on linear guides, and the 350°C nozzle in the title opens the door to hotter filaments than a typical 300°C machine. Full auto calibration, pre-print checks and 22 sensors cover setup and monitoring. The listing gives no build volume, nozzle size or purge waste figure, so check ELEGOO's spec sheet for those before you buy. This review is drawn from ELEGOO's listing and published specs; we did not print on it.
What stands out
- CANVAS 4-color, RFID, auto refill
- 500mm/s, 20,000mm/s² CoreXY
- 350°C nozzle (title)
- 22 sensors, full auto calibration
- 5-inch touchscreen, 33.1 lb
Who it fits
Good fit for
Beginners who want four-color prints in the box, with RFID spool recognition and refill doing the setup work.
Who should skip it
Buyers who need a stated build volume or an enclosure; the listing gives neither.
Verdict: A beginner-friendly four-color CoreXY combo, with the build volume left for you to confirm.
ELEGOO Centauri 2 Combo key specs
CANVAS 4 colors
Independent motors per slot for quick color changes.
RFID + auto refill
Spools are recognized and swapped when empty.
500mm/s, 20,000mm/s²
CoreXY speed on linear guides and an aluminum frame.
350°C nozzle
Higher ceiling than most 300°C consumer hotends.
22 sensors
Pre-print checks and monitoring during the job.
What comes in the Centauri 2 Combo
The combo pairs the Centauri 2 CoreXY printer with the CANVAS four-spool unit. ELEGOO mentions vibration compensation, precise extrusion control, a magnetic printhead cover, a semi-automatic belt tensioner and a nozzle wiper. At 33.1 lb and 18.9×19.7×23.2 in as listed, it is a bench-sized machine; no enclosure is mentioned.
Printing in four colors on the Centauri 2
Find models on ELEGOO's Nexprint library, slice in ELEGOOSlicer and send jobs or watch progress through the ELEGOO Matrix app. RFID spools load their settings without typing; third-party spools will need manual entry, as the listing names RFID only for recognition. Belt tensioning is semi-automatic and the wiper keeps the nozzle clean between color changes.
Before buying the Centauri 2 Combo
Checks.
Check before you buy
- The Centauri 2 Combo build volume suits your parts
- Your Centauri 2 spools are RFID or you will enter settings by hand
- Your bench takes a 33.1 lb Centauri 2 Combo
The product at a glance
ELEGOO Centauri 2 Combo Multi-Color 3D Printer
Best for: Multicolor beginners
- Print Speed
- 500mm/s
- Multicolor Capacity
- 4-color
- Leveling Type
- Auto Leveling
- Motion Structure
- CoreXY
- Color Printing
- Multi-Color
- Features
- High Speed
View on Amazon: ELEGOO Centauri 2 Combo Multi-Color 3D Printer Affiliate link
ELEGOO Centauri 2 Combo: CANVAS 4-color with RFID and auto refill, 500mm/s CoreXY, 350°C nozzle, 22 sensors; no build volume listed.
Pros
- Four colors with RFID and refill
- 350°C nozzle
- Auto calibration and pre-print checks
Cons
- No build volume on the listing
- No enclosure mentioned
- Purge waste not stated
Good fit if
- You want four-color printing with little setup
Skip if
- You need a Centauri 2 with an enclosure for ABS
Verdict: An easy four-color CoreXY starter, build volume still to confirm.
Specifications side by side
| Spec | ELEGOO Centauri 2 Combo Multi-Color 3D Printer |
|---|---|
| Print Speed | 500mm/s |
| Multicolor Capacity | 4-color |
| Leveling Type | Auto Leveling |
| Motion Structure | CoreXY |
| Color Printing | Multi-Color |
| Structure | CoreXY |
| Leveling | Auto Leveling |
| Features | High Speed |
| Target Audience | Beginners |
| Color | Black |
| Dimensions | 19.7 × 18.9 × 23.2 inches |
| Weight | 33.1 pounds |
| Size | Centauri 2 Combo |
| Model | Centauri 2 Combo |
Frequently asked questions
How many colors can the ELEGOO Centauri 2 Combo print?
Four, through the CANVAS system with one motor per slot.
How fast is the Centauri 2 Combo?
ELEGOO rates the Centauri 2 at 500mm/s top speed and 20,000mm/s² acceleration.
What nozzle temperature does the Centauri 2 Combo reach?
The listing title gives 350°C.
What is the Centauri 2 Combo build volume?
ELEGOO leaves the Centauri 2 build volume off this listing.
See also
- flashforge adventurer 5m fast prototyping review
- flashforge ad5x multicolor 220mm bed review
- flashforge adventurer 5m pro quiet nozzle bundle review
- elegoo centauri carbon 3d printer review
- elegoo 5pcs acf release liner review
- ELEGOO Saturn 3 12K Resin 3D Printer Review (2026): A Spec-Based Look
- ELEGOO Mars 4 Ultra 9K Review: Specs, Pros and Cons
- ELEGOO Mercury Plus 2.0 Wash and Cure Station Review: Who It Fits and Who Should Skip It
- elegoo centauri carbon 2 combo 3d printer review
- dji rs 2 combo review
