Aladrs 6.23-Inch Screen Protector for Photon Mono 4K Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
A torn release film lets resin reach the LCD, and once it cures on the screen the printer usually needs a new screen. Aladrs sells a 5-pack of 6.23-inch protectors cut for the Anycubic Photon Mono 4K to prevent that. Each film is 0.1mm PET, laminated on both sides against scratches, with over 95% light transmittance so UV exposure is barely affected. The film also guards the screen while you pour or recover resin. Aladrs says print volume is unchanged once fitted, but the printer needs leveling again after a film goes on. The model code is ALA-3D-018. Five films let you replace one as soon as it is scratched or cloudy. Our notes follow Aladrs' listing.
What stands out
- 5 films, 6.23-inch
- 0.1mm PET, over 95% transmittance
- For the Photon Mono 4K
Who it fits
Good fit for
Photon Mono 4K owners who want cheap protection for the LCD against leaks and scratches.
Who should skip it
Owners of other Photon models, and anyone unwilling to re-level after fitting a film.
Verdict: Cheap insurance for a Mono 4K screen; five spares last a long time.
Aladrs Mono 4K film specs
6.23-inch
Photon Mono 4K screen.
5 pieces
Spares for swaps.
0.1mm PET
Thin, flexible.
Over 95% transmittance
Little effect on exposure.
Double-side laminated
Resists scratches.
Model ALA-3D-018
Aladrs part code.
What the film protects against
The main threat is resin under a damaged release film. Cured resin on a bare LCD is hard to remove without scratching it; on a protector it means peeling off a cheap film. The film also takes the scratches from scrapers and dropped tools. Above 95% transmittance it has little effect on exposure, though a very tight exposure profile may need a small adjustment.
Fitting it
Clean the screen, lay the film without trapping dust or bubbles, then level the platform again since the surface sits 0.1mm higher. Choose the Aladrs film for a Photon Mono 4K; choose a 10.1-inch protector if you own a larger Photon such as the M5 series.
Before you order
Checks for Aladrs Mono 4K films.
Check before you buy
- Your printer is a Photon Mono 4K
- You will re-level after fitting
- You can lay a film without bubbles
- You want spares for later
The product at a glance
Aladrs 6.23" PET Screen Protector
Best for: Photon Mono 4K owners
- Primary Material
- PET
- Film Thickness
- 0.1 mm
- Printing Technology
- Resin
- Resolution
- 4K
- Dimensions
- 7.09 × 3.54 × 0.5 inches
- Weight
- 0.71 ounces
View on Amazon: Aladrs 6.23" PET Screen Protector Affiliate link
Aladrs 5-pack 6.23-inch PET screen protectors for the Photon Mono 4K: 0.1mm, over 95% transmittance, double-side laminated.
Pros
- Saves the LCD from resin leaks
- Five spares
- Thin, high transmittance
Cons
- Re-level after fitting
- Mono 4K only
Good fit if
- You own a Photon Mono 4K
- Your release film has torn before
Skip if
- Your printer has a larger screen
Verdict: A cheap, sensible protector for the Mono 4K.
Specifications side by side
| Spec | Aladrs 6.23" PET Screen Protector |
|---|---|
| Primary Material | PET |
| Film Thickness | 0.1 mm |
| Printing Technology | Resin |
| Resolution | 4K |
| Dimensions | 7.09 × 3.54 × 0.5 inches |
| Weight | 0.71 ounces |
| Size | 6.23 inch |
| Color | Tranparent |
| Model | ALA-3D-018 |
If you are weighing screen protection against a projection setup instead, our elite screens manual series review covers that product line by its published specs.
Frequently asked questions
Which printer does the Aladrs 6.23-inch film fit?
The Anycubic Photon Mono 4K.
How thick is the Aladrs screen protector?
0.1mm PET.
Does the Aladrs film affect UV exposure?
Aladrs lists over 95% light transmittance.
Do I need to level the Mono 4K again after fitting the film?
Yes, Aladrs says to re-level after installing.
How many films come in the Aladrs pack?
Five.
